ClimbAnyHill Posted January 21, 2007 Report Posted January 21, 2007 I need a bit of help here. Just want to clarify if this is the correct hole to drill & tap. Here's a pic. Quote
375hp banshees Posted January 21, 2007 Report Posted January 21, 2007 that's where mine are :thumbsup: your gonna be there all day though...you better turn that drill bit around & use A drill :yelrotflmao: jk Quote
ClimbAnyHill Posted January 21, 2007 Author Report Posted January 21, 2007 Ok!! Thanks for the rapid response & assistance. Back to finishing them up Quote
ClimbAnyHill Posted January 21, 2007 Author Report Posted January 21, 2007 Another thing, surface to the hole is at an angle. Is this what you guys are filing down to make flat? Thanks. Quote
Ting Ting Posted January 21, 2007 Report Posted January 21, 2007 Yeah you need to take it down a little and make it square. Quote
Handyman Posted January 21, 2007 Report Posted January 21, 2007 Another thing, surface to the hole is at an angle. Is this what you guys are filing down to make flat? Thanks. Yep it has to be filed flat abd has to be filed down to a certain heigth for the screw to make contact with the slide....Should be in the directions Quote
okbeast Posted January 21, 2007 Report Posted January 21, 2007 Mine didnt come with directions, so with about 10 posts and all the info I hope I've got it down. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.