sand rocket Posted December 15, 2006 Report Posted December 15, 2006 Put in the new intakes today. They look very nice! But heres the deal, Carb wont fit on left side. Pipe is in the way. ANyone else running the boss intake with cpis have this problem? It looks like i coud get them to fit without a pipe clamp, but what good would that be. Carbs are 34mm Mikuni flat slides. Quote
fastbanshee8 Posted December 15, 2006 Report Posted December 15, 2006 I have the same set up, and I just ended up tilting my carb to the inside. It's been like that for a year, and no problems so far. I also used some spacers between the pipe hangers and the frame, to gain a little bit more room. Quote
sand rocket Posted December 15, 2006 Author Report Posted December 15, 2006 Ive been out trying to get them to fit. Looks like i need to but the hangers back on the rear, and space as much as i can get between the frame and the hanger, and hanger to silencer. Also going to have to cut off the nipples for the stock air box to fit the bigger filters. Quote
fastbanshee8 Posted December 15, 2006 Report Posted December 15, 2006 Yeah, I forgot to mention that I also had to space my silencers out from the frame. I've got one of the FAT grab bars, and the silencers were hitting it. I think I used 3/8" spacers, front and rear. Quote
jbooker82 Posted December 15, 2006 Report Posted December 15, 2006 I can image that is a tight fit. It is a tight fit with my toomey t5's. Quote
majicmike Posted December 17, 2006 Report Posted December 17, 2006 I can image that is a tight fit. It is a tight fit with my toomey t5's. There are intake angled to the right just to avoid this. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.