Bigvincent Posted October 28, 2006 Report Posted October 28, 2006 I have just begun my engine rebuild and have hit a bit of a snag. I have had my jugs ported, bored and honed. Got the the adjustable timing plate with +4 adv. I don't have the money for a Noss head, but (always a but) if it is really worth it than maybe a could pinch it. Will it do any harm running the stock head? TIA Quote
Big Blue Posted October 28, 2006 Report Posted October 28, 2006 No it wont hurt anything running the stock head. Quote
cbn70 Posted October 28, 2006 Report Posted October 28, 2006 Why not just send your stock head to the person who did the porting and he can set up your stock head to match your porting?? Quote
locogato11283 Posted October 28, 2006 Report Posted October 28, 2006 you can have your stock head milled at any machine shop... Quote
Bigvincent Posted October 28, 2006 Author Report Posted October 28, 2006 I was just got layed off so $$$ is tight...i just wanted to make sure I could get away using the stock head without causing any damage for now. Quote
baddsheee Posted October 28, 2006 Report Posted October 28, 2006 Milling a stock head only runs about $50. Just a thought. Quote
BANSHEEPRO Posted October 29, 2006 Report Posted October 29, 2006 Milling a stock head only runs about $50. Just a thought. WONT HURT IT A BIT BRO SLAP HER ON ACTUALY FOR FUTURE REF THERE ARE ALOT OF RACERS OUT HERE MAKIN BIG POWER ON THE STOCKERS Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.