byebyeshee Posted October 21, 2006 Report Posted October 21, 2006 I have Shee parts for cash but sick or haggeling so trading may be a way to get what I want and do the same for you. I am still open to Shee parts cash offers. Will provide you with picture, need that from you also. I know what your parts are worth and you know what mine are worth. I won't trade or sell junk and ask you for the same. I have alot of low hour, very very nice Banshee parts. The parts are great or better than great from a 2000. Off the top of my head I have - Frame, cases, Dominator +2 axle, all 4 hubs, tank radiator, left a arms both, sweet throttle and cable with TORS, pegs, shift, kick, radiator, clutch cover, stator cover, Nice blue plastics, grab bar, stock bars, tranny gears, swinger, dogbone, airbox, proflow with K+N, flywheel, sprocket and brake hub, swing bolt, tie rod, coil, 2 intakes 1 reed, clutch and parking brake, motor mounts, kicker gears. I could use some of the following parts. Parts are for an 85 200X and a couple of 250SX's so keep that in mind. I can pay cash also for the following. All I really need now or would pay for is the following 3 things... 1 - A pair of aluminum 400EX rear rims 10" diameter and 9" wide. 2 - A set of rear aluminum rims and tires 20" diameter for Honda pattern 110 - not cheap tires!! Must be nice rims and 80% tread and good tires - no tubes, no sidewall problems and at least 4ply or greater like an XCR etc. - I like stock ATC250R gold rims and tires, would take a set of 3. 3 - A 85 200X toolbox and a nice 200X swingarm bolt and adjusters. These things I could use and will trade Banshee parts for the following. A 250R or 200X front rim and tire - Stock gold 85/86 R tire is nice, couls use hub setup too. A 85 200X and a 86 350X carburetor - no broken air screw etc, must be repairable and complete. Front Master cylinder from a clean newer Banshee, mine was broke. A 250SX rear differential. A 350X dual headlight. A 85 200X front caliper, rebuildable. A 85 thru 87 250SX tailight assembley. A 86/87 250SX swingarm for fabricating purposes. Quote
Bmack682 Posted October 22, 2006 Report Posted October 22, 2006 What condition is the banshee frame in and do you have the title for it. I have Shee parts for cash but sick or haggeling so trading may be a way to get what I want and do the same for you. I am still open to Shee parts cash offers. Will provide you with picture, need that from you also. I know what your parts are worth and you know what mine are worth. I won't trade or sell junk and ask you for the same. I have alot of low hour, very very nice Banshee parts. The parts are great or better than great from a 2000. Off the top of my head I have - Frame, cases, Dominator +2 axle, all 4 hubs, tank radiator, left a arms both, sweet throttle and cable with TORS, pegs, shift, kick, radiator, clutch cover, stator cover, Nice blue plastics, grab bar, stock bars, tranny gears, swinger, dogbone, airbox, proflow with K+N, flywheel, sprocket and brake hub, swing bolt, tie rod, coil, 2 intakes 1 reed, clutch and parking brake, motor mounts, kicker gears. I could use some of the following parts. Parts are for an 85 200X and a couple of 250SX's so keep that in mind. I can pay cash also for the following. All I really need now or would pay for is the following 3 things... 1 - A pair of aluminum 400EX rear rims 10" diameter and 9" wide. 2 - A set of rear aluminum rims and tires 20" diameter for Honda pattern 110 - not cheap tires!! Must be nice rims and 80% tread and good tires - no tubes, no sidewall problems and at least 4ply or greater like an XCR etc. - I like stock ATC250R gold rims and tires, would take a set of 3. 3 - A 85 200X toolbox and a nice 200X swingarm bolt and adjusters. These things I could use and will trade Banshee parts for the following. A 250R or 200X front rim and tire - Stock gold 85/86 R tire is nice, couls use hub setup too. A 85 200X and a 86 350X carburetor - no broken air screw etc, must be repairable and complete. Front Master cylinder from a clean newer Banshee, mine was broke. A 250SX rear differential. A 350X dual headlight. A 85 200X front caliper, rebuildable. A 85 thru 87 250SX tailight assembley. A 86/87 250SX swingarm for fabricating purposes. Quote
byebyeshee Posted October 22, 2006 Author Report Posted October 22, 2006 What condition is the banshee frame in and do you have the title for it. The frame is in great shape, no welds or breaks. Top key sw mount got tweaked from being stored on it's back. I bent it back by hand , just want to disclose everything. Bottom has scratches but no major rock bashing. It will cost about 85$ plus to ship from MASS. I will provide a bill of sale. Quote
87_shee Posted October 25, 2006 Report Posted October 25, 2006 how much for the axle, to canada Quote
yamaban Posted October 25, 2006 Report Posted October 25, 2006 hi i think i have a complete swinger with bolt ill look and i know i have a bunch of 200x part arround here ive done a few over the years also have a atc 125 and 84 r frame I have Shee parts for cash but sick or haggeling so trading may be a way to get what I want and do the same for you. I am still open to Shee parts cash offers. Will provide you with picture, need that from you also. I know what your parts are worth and you know what mine are worth. I won't trade or sell junk and ask you for the same. I have alot of low hour, very very nice Banshee parts. The parts are great or better than great from a 2000. Off the top of my head I have - Frame, cases, Dominator +2 axle, all 4 hubs, tank radiator, left a arms both, sweet throttle and cable with TORS, pegs, shift, kick, radiator, clutch cover, stator cover, Nice blue plastics, grab bar, stock bars, tranny gears, swinger, dogbone, airbox, proflow with K+N, flywheel, sprocket and brake hub, swing bolt, tie rod, coil, 2 intakes 1 reed, clutch and parking brake, motor mounts, kicker gears. I could use some of the following parts. Parts are for an 85 200X and a couple of 250SX's so keep that in mind. I can pay cash also for the following. All I really need now or would pay for is the following 3 things... 1 - A pair of aluminum 400EX rear rims 10" diameter and 9" wide. 2 - A set of rear aluminum rims and tires 20" diameter for Honda pattern 110 - not cheap tires!! Must be nice rims and 80% tread and good tires - no tubes, no sidewall problems and at least 4ply or greater like an XCR etc. - I like stock ATC250R gold rims and tires, would take a set of 3. 3 - A 85 200X toolbox and a nice 200X swingarm bolt and adjusters. These things I could use and will trade Banshee parts for the following. A 250R or 200X front rim and tire - Stock gold 85/86 R tire is nice, couls use hub setup too. A 85 200X and a 86 350X carburetor - no broken air screw etc, must be repairable and complete. Front Master cylinder from a clean newer Banshee, mine was broke. A 250SX rear differential. A 350X dual headlight. A 85 200X front caliper, rebuildable. A 85 thru 87 250SX tailight assembley. A 86/87 250SX swingarm for fabricating purposes. Quote
brokesoftwaretester Posted October 27, 2006 Report Posted October 27, 2006 If the Clutch Cover(whole cover that covers the clutch, not the insert) is in good shape, how much shipped to 80911? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.