walk72 Posted October 4, 2006 Report Posted October 4, 2006 Ok, so I baught a shee this weekend and was told it was a 4mm with the long rod kit. Well we took one of the cilenders off and noticed no spacer plate, so we looked and the dome to see if it had been machined to make up for the stroke and it hadent. So we measured the stroke and stock is 54 and thats all we get, with a 4mil you should be at 58 right. Is there anything I am missing or did I get riped off. Quote
locogato11283 Posted October 4, 2006 Report Posted October 4, 2006 sounds like you got screwed... Quote
dajogejr Posted October 4, 2006 Report Posted October 4, 2006 Ok, so I baught a shee this weekend and was told it was a 4mm with the long rod kit. Well we took one of the cilenders off and noticed no spacer plate, so we looked and the dome to see if it had been machined to make up for the stroke and it hadent. So we measured the stroke and stock is 54 and thats all we get, with a 4mil you should be at 58 right. Is there anything I am missing or did I get riped off. I'd measure the rod if you can, as well. Chances are, if it's not stroked, it's not a long rod either. Stock is 110, long rods are 115mm... I'd call him out on it, or have him refund you a fair amount of money towards that part. Gonna be tough, though...I'm sure it's as is on the bill of sale. That's just one of those things....a matter of honesty... Also...the previous owner could've bought it that way and never tore it down. So...before you go ripping their head off...get the whole story from them. Quote
badassbanshee479 Posted October 4, 2006 Report Posted October 4, 2006 if its a long rod stroker there should be a number on the side of the rod. check and see if there is. Quote
walk72 Posted October 4, 2006 Author Report Posted October 4, 2006 it is a long rod we did measure that. And it does have a hot rods crank, but not a 4 mil, I called him up and he was like uh thats weird, I paid kim and K&T for a 4mil, so he was going to call Kim and ask him about it. But I think things will go in my favor. I paid 75% in cash then gave him a check for the other 25% well soon as I found this out I put a stop payment on that check, so he wont be able to cash it. And when we wrote up a bill of sale we did it for only 500.00. So as of right now I can go register it in my name. Quote
dajogejr Posted October 4, 2006 Report Posted October 4, 2006 K&T didn't get to where they are today by screwing people over. I've never read a bad thread or thing said about them....other than their shit flat out hauls the mail. Something sounds fishy...and good for you...hopefully this guy is cool, and works with you instead of trying to be a dickwad.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.