Clutch kit

[tonyown]

Hi all

I'm gonna install a barnett clutch kit next week and I'd like to have your impression about this kit and anything you can tell me that I'll need to have or to know to change it

answer will be apreciated thank you people :baseball_original:

[Bansh-eman]

you ust getting fibers and steels with hd springs?

[locogato11283]

i think barnett is junk,,my personal opinion....

[TREELIZARD]

Soak the clutch in oil before you install it. you dont want to put it together dry. be carefull not to loose the little ball when you remove the pressure plate, check the condition of your clutch basket. if you are replacing the stock clutch, then you can throw away the rubber rings that are in there. when putting it back together you will start with a fiber plate and then you will put in a steel plate and keep alternating them fiber, steel, fiber, steel, you will end with a fiber plate. do not over tighten the bolts that hold the pressure plate because they will strip very easy. make sure to properly adjust the nut in the center of the pressure plate so that your clutch arm lines up with the arrow on the case. its not that hard of a job take your time you'll be ok.

[tonyown]

it's what I bought: http://www.moto-man.com/cgi-bin/motoman/1150.html

thank you for answer!

[.100_over]

I have a barnett clutch in one of my banshees and it works great!!

[michigan_soler]

i just orderd one of these, since im in michigan i hope it gets here quick so i can hit up silver one last time!!!

[rocketboy]

I like my FZR1000 clutch the best ,but barnett work really good on a mild banshee from what ive seen