Video of motor smoking... attached to prior post

[Bansh-eman]

the first video is just starting up ... normal smoking.... but watch the second video and when you rev it alot of smoke comes out even after 2 min of warming up.

 

Startup

 

After Warmed Up

 

 

so we got the pipes at normal heat but this is the smoking i was talking about...

Edited August 11, 2006 by Bansh-eman

[Polish]

seems normal maybe a little rich..........sounds crisp............your gunna have to teach me how to dowload videos

[Bansh-eman]

Polish hurry up and leave a reply already i know your watching it lol :baseball_w00t:

 

damn you beat me to the post befor i could hit enter lol...

 

we didnt take a shot from outside with all the smoke built up.. theres alot of it outside...

 

ill show you how to record it its ez.

Edited August 11, 2006 by Bansh-eman

[Polish]

remember its better to be to rich than not rich enough!

[Bansh-eman]

well i have a 158 main and a 55 pilot... but its not ideling with the 55 in there... ill try dropping the main to 155 and doing it again... also i cleaned out the pipes today to get all the oil out and alot came out of it....

[Polish]

just ride that sh*t hard it will clean out..........

[dajogejr]

What kind of oil and at what mixture are you running at?

[400ccStroker_shee]

What kind of oil and at what mixture are you running at?

 

 

This is his buddy and I think he is running yamalube 2r 30:1

[dajogejr]

 

 

This is his buddy and I think he is running yamalube 2r 30:1

 

2r is fine, and a lot of people run it.

 

If you're concerned about the smoking, though...try another synthetic oil. At least you know shee's gettin the oil...just make sure it's not too much to where it's fouling plugs, etc.

[KEVSWS6]

the first video is just starting up ... normal smoking.... but watch the second video and when you rev it alot of smoke comes out even after 2 min of warming up.

 

Startup

 

After Warmed Up

so we got the pipes at normal heat but this is the smoking i was talking about...

 

I cant remember if you are local. For Glamis your set up matches mine except for the porting and pipes. This is what works for me. The needle is very important. DEK needle 52 pilots and a 155 to 158 main.

[bigboybanshee]

Looks about normal to me! Remember it is a 2 stroke, they do burn oil :beer:

[Bansh-eman]

I cant remember if you are local. For Glamis your set up matches mine except for the porting and pipes. This is what works for me. The needle is very important. DEK needle 52 pilots and a 155 to 158 main.

 

yea im local... im in mission valley, im going to play with my jets and see if it changes anything... but im having hell getting it to idle .

 

 

Looks about normal to me! Remember it is a 2 stroke, they do burn oil :beer:

 

it looks normal from that vid, but we didnt point the camera out the garage and show you how much is built up out side.. its alot more smoke then normal. and im running like 30:1 or 32:1 yama R2....

[400ccStroker_shee]

yea im local... im in mission valley, im going to play with my jets and see if it changes anything... but im having hell getting it to idle .

it looks normal from that vid, but we didnt point the camera out the garage and show you how much is built up out side.. its alot more smoke then normal. and im running like 30:1 or 32:1 yama R2....

 

bump

[ojcool]

bump

 

Hmm, you know anyone with a wideband? That looks rich as hell to me but I would want to see the A/F ratios. In my limited experience your problem would is 80% needle/pilot issues.