AustinONeal Posted August 2, 2006 Report Posted August 2, 2006 Im ready to get my crank for my banshee, but i dont know where to get it and what all i will need. so i thought i would come to you guys. I dont want one that is a piece of junk, i want one that is reliable and will not go down on me. I would like to know what all is i need. If there is a web site u can go to order it all i would greatly appreciate the informaion. I know i will need the crank, and bearings, spacer plate and gaskets, im not sure if i will need any type of different pistons but it seems like i would. but i would just like it make this as easy as possible where do i go online to get what i want? and anyother appication that i might need because im going to go with the 68mm cheetahs in a month or two. But just let me know. Austin Quote
watkins Posted August 2, 2006 Report Posted August 2, 2006 Call Jim @ Passion racing he will hook you up with what you need. 918-232-3950 Quote
strokrbanshee1 Posted August 2, 2006 Report Posted August 2, 2006 I wouldnt call him, if you want to go FAST call jeff @ 785 364 5325... he has everything in stock and would be more than happy to help you out.. Quote
r1 banshee Posted August 2, 2006 Report Posted August 2, 2006 try jim at Insane racing 602-329-5422 he can get every ting that you need. Quote
Bansh-eman Posted August 2, 2006 Report Posted August 2, 2006 id go with FAST , Jeff is great to deal with and has a very good rep! Quote
AustinONeal Posted August 2, 2006 Author Report Posted August 2, 2006 do any of these ppl have a web site>? Quote
RILS Posted August 2, 2006 Report Posted August 2, 2006 (edited) Im ready to get my crank for my banshee, but i dont know where to get it and what all i will need. so i thought i would come to you guys. I dont want one that is a piece of junk, i want one that is reliable and will not go down on me. I would like to know what all is i need. If there is a web site u can go to order it all i would greatly appreciate the informaion. I know i will need the crank, and bearings, spacer plate and gaskets, im not sure if i will need any type of different pistons but it seems like i would. but i would just like it make this as easy as possible where do i go online to get what i want? and anyother appication that i might need because im going to go with the 68mm cheetahs in a month or two. But just let me know. Austin Dan@a&s gave me the best price on my parts but it was on a cub,im sure he can hook you up with a crank and porting and domes to match reasonable.I beleave his stuff is as fast as any.I found that to correctly setup a 4mill which includes matching up the porting and cutting the domes it was so close to a set of cubs that i just went with the cub.Now that was starting with a completlt stk jugs and ending up with drag ported 4mill cylinders,but if your jugs are already ported you can just drop the transfer floors to the top of the piston if your tranfers havent been raised, if they have then it will usually raise the transfer duration to high.Most builders will just drop the tranfer floors for about 100bucks. Edited August 2, 2006 by RILS Quote
dajogejr Posted August 2, 2006 Report Posted August 2, 2006 Dan@a&s gave me the best price on my parts but it was on a cub,im sure he can hook you up with a crank and porting and domes to match reasonable.I beleave his stuff is as fast as any.I found that to correctly setup a 4mill which includes matching up the porting and cutting the domes it was so close to a set of cubs that i just went with the cub.Now that was starting with a completlt stk jugs and ending up with drag ported 4mill cylinders,but if your jugs are already ported you can just drop the transfer floors to the top of the piston if your tranfers havent been raised, if they have then it will usually raise the transfer duration to high.Most builders will just drop the tranfer floors for about 100bucks. Wow..Dan actually answered the phone? Wow...he must have heard it passing by on the way to the can. However, Dan is very busy I understand, and builds some fast ass shit, that is indisputable. I'd call Jeff @ FAST too. Great guy, even better prices. He's my first call for any parts, even if I know I can save a buck or two on fleabay...his service is worth it. Quote
odaen Posted August 2, 2006 Report Posted August 2, 2006 Im ready to get my crank for my banshee, but i dont know where to get it and what all i will need. so i thought i would come to you guys. I dont want one that is a piece of junk, i want one that is reliable and will not go down on me. I would like to know what all is i need. If there is a web site u can go to order it all i would greatly appreciate the informaion. I know i will need the crank, and bearings, spacer plate and gaskets, im not sure if i will need any type of different pistons but it seems like i would. but i would just like it make this as easy as possible where do i go online to get what i want? and anyother appication that i might need because im going to go with the 68mm cheetahs in a month or two. But just let me know. Austin for the crank, you can go on ebay and buy it from VIPRACING450 for like 425 shipped. or you can buy a complete rebuild kit (gaskets, pistons, bearings) for 600 or something... http://cgi.ebay.com/ebaymotors/STROKER-CRA...55954QQtcZphoto Hard to beat those prices on components. If your cylinders are already ported for stock stroke, you definitely don't want to run a spacer plate, instead get your head cut, or some domes cut for a coolhead. Otherwise your transfer timings are gonna be insanely high if they've been previously raised. Quote
watkins Posted August 2, 2006 Report Posted August 2, 2006 do any of these ppl have a web site>? Passion does: http://www.passionracingengines.com/index.html Standup guy, great work and awesome prices. His customer service is top notch, couldnt be happier. Quote
Animalman294 Posted August 2, 2006 Report Posted August 2, 2006 I'm dealin' with Jeff at FAST and a great guy to work with............. :beer: Quote
dajogejr Posted August 3, 2006 Report Posted August 3, 2006 for the crank, you can go on ebay and buy it from VIPRACING450 for like 425 shipped. or you can buy a complete rebuild kit (gaskets, pistons, bearings) for 600 or something... http://cgi.ebay.com/ebaymotors/STROKER-CRA...55954QQtcZphoto Hard to beat those prices on components. If your cylinders are already ported for stock stroke, you definitely don't want to run a spacer plate, instead get your head cut, or some domes cut for a coolhead. Otherwise your transfer timings are gonna be insanely high if they've been previously raised. MotoMan has some good stuff, in canton, MI. Didn't realize his prices were that good, only 45 minute drive for me... Quote
gipperz Posted August 3, 2006 Report Posted August 3, 2006 I wouldnt call him, if you want to go FAST call jeff @ 785 364 5325... he has everything in stock and would be more than happy to help you out.. Thats what I did, my shit hauls ass, scarey f.a.s.t. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.