Bunny771 Posted July 21, 2006 Report Posted July 21, 2006 I am interested in buying new carbs for my banshee but i do not know what size i should buy and what brand. I am looking for carbs with idle screw built in so i do not have to tap it myself. My banshee is primarily used for dirt trailing. Quote
96dragbanshee Posted July 21, 2006 Report Posted July 21, 2006 would you mind giving us the mods on your bike so we can set you up with the best bang for your specific quad. I run Trinity but probably not what you want for your type of riding give us a little info and i will surely help you with the route to go. Quote
dajogejr Posted July 21, 2006 Report Posted July 21, 2006 28 to 30mm PWK or Mikuni carbs will work just fine. If you go any bigger than that with stock porting, I think you'll be wasting your money, let alone...you'll be taking away from the already absent low end. Honestly, drilling and tapping the holes in your stockers to remove the TORS is really no big deal. But, PWK carbs are much easier to work on... The slide design is prone to sticking on the stockers....not an issue on other models of carbs. If you want to stick to trailing, a single 35PWK 1 into 2 carb setup might be up your alley, as well!! Quote
blueshee03 Posted July 21, 2006 Report Posted July 21, 2006 28mm PWK's would be the ticket. i agree with the 28 pwk's.they are a great carb for stock to lightly modded shee's. Quote
Bunny771 Posted July 23, 2006 Author Report Posted July 23, 2006 Basically my whole banshee is stock right now. I want to get new exhaust and do a little to my engine in the near future. Im aiming to do some mx dirt track type of things. What type of things would i be expected to buy if i was wanted to ride mx tracks. Quote
dajogejr Posted July 23, 2006 Report Posted July 23, 2006 To be honest, for MX tracks you bought the wrong bike. Any of the 450s would have been a better choice. To answer your question...You'll want a bottom-mid pipe and a 1 into 2 carb setup. If you plan on doing MX...forget about anything (other than pipes)...get the suspension done first. Having all that power in the motor ain't gonna mean squat when the guys ripping by you are down 10 HP but have 10X better suspension. Revalved rear...at least some works up front. Elkas are pricey, but good stuff. Probably a wider rear axle, and +2 +1 A Arms as well. Quote
greg_banshee Posted July 23, 2006 Report Posted July 23, 2006 yeah the 28's i just put on Mikuni flat slides are aswome i love them i noticed a big difference the Shee is mildly moddd nothing serious but man them with V-Force & k&n clamp-on's were a big power gain ! 28's ! Quote
Bunny771 Posted July 23, 2006 Author Report Posted July 23, 2006 Is there anyplace online i can buy 28 pwk carbs? I searched around a little and didnt find much. Quote
dajogejr Posted July 23, 2006 Report Posted July 23, 2006 call a builder. Magic is more money... Call Jeff @ FAST (do a search here) Jim @ Passion, Kim @ K&T. I'll gaurentee any of those guys can beat Magic Racing! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.