Jump to content

Recommended Posts

Posted (edited)

stator resistance : ignition coil should be 13.7-20.5 ohms ( red to green wire ) pickup coil should be 94-140 ohms ( white/red to white/green wire ) lighting coil should be 0.26-0.38 ohms ( black to yellow wire ) coil resistance: primary coil should be 0.28-0.38 ohms secondary coil should be 4,700-7,100 ohms pickup coil gap: 0.015"-0.020"

Edited by TREELIZARD
Posted

stator resistance : ignition coil should be 13.7-20.5 ohms ( red to green wire ) pickup coil should be 94-140 ohms ( white/red to white/green wire ) lighting coil should be 0.26-0.38 ohms ( black to yellow wire ) coil resistance: primary coil should be 0.28-0.38 ohms secondary coil should be 4,700-7,100 ohms pickup coil gap: 0.015"-0.020"

 

 

 

yea i checked everything else and found a bad stator and coil. i just replaced the stator and wanted to make sure i was getting enough volts out of it. now i guess i need to replace the coil

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...