vainavic Posted July 2, 2006 Report Posted July 2, 2006 All right any help would be great my friend and I have been completely lost. I Just bought trinity cheetah cylinders with a 4mm stroker, I have 34mm pj carbs and shitty but paul turner mid range pipes, We have been trying to jet this thing but now we noticed that there is gas in the exhaust! what the hell is this all about? Right now I have 142 main jet and 40 pilot needle in the middle, My is at zero but I have an adjustable timing plate so should I make it +4 or do I have other issues? I have rz cases and the rz cdi with a banshee stator, would this mess up the timing? :shoothead: any thoughts would help jeff Quote
wesw Posted July 2, 2006 Report Posted July 2, 2006 raw gas like just pissing out of them in liquid form?? Quote
vainavic Posted July 5, 2006 Author Report Posted July 5, 2006 yeah, I have no idea Why maybe my plugs arent hot enough? Should I pull it around to run the gas out of ther cylinders? Quote
Dinner Posted July 5, 2006 Report Posted July 5, 2006 When i first brought my banshee home, it had fuel coming out the left silencer. So i fiddled with the jetting and it made it better and my ratio was 24:1 then, now 32:1 so that helped some also. But i noticed that my floats wernt the same as the other side, they wernt "floating" the same and were bent some. So check your floats and make sure they are working properly, and maybe you have a large pilot in there as well? Quote
liquedfire Posted July 6, 2006 Report Posted July 6, 2006 i just just just had the same problem my fix was needle and seat :shoothead: take your carbs off then take your float bowl off (with your fingers) push the float up and try blowing air (wit your mouth) and see if it keeps pressure if it doesint then u need needle and seats hope this helps :beer: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.