lonestarshee Posted July 1, 2006 Report Share Posted July 1, 2006 hello, my banshee is bogging out from low to mid range. If i have the rpms higher it runs fine. Do the carb's need to be adjusted? i am getting fed up with these 2 stroke machines since there is always tinkering to do on them. thank you Quote Link to comment Share on other sites More sharing options...
korndawg Posted July 1, 2006 Report Share Posted July 1, 2006 What kind of a setup are you running, as far as pipes, carbs, jet size, etc? Quote Link to comment Share on other sites More sharing options...
lonestarshee Posted July 1, 2006 Author Report Share Posted July 1, 2006 i picked up the machine recently. v-force reed valves, pro circuit 304's, i believe the jetting is factory, carbs are supposedly larger, air box lid is cut. machine runs great when it wants to. im thinking of draining the fuel out and re mixing since another family member pre mixed oil for the machine and the oil content may be to high? i heard 32:1 is a good ratio? ill check out the plugs to see if they are black or not. Quote Link to comment Share on other sites More sharing options...
00ultraz28 Posted July 1, 2006 Report Share Posted July 1, 2006 the jets are your problem if they are still factory. Anytime you get more air in or out of the motor it needs more fuel. Quote Link to comment Share on other sites More sharing options...
CadillacBanshee Posted July 1, 2006 Report Share Posted July 1, 2006 Check your slides, they could be backwards. The cutout is supposed to be facing the rear of the bike. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.