No compression

[87sheerips]

just a little lost that i can kick it over with one finger. Ran fine a day ago, then no start at all. Havent got a comp. tester on it though. Tryin to help a friend here, thanks....

[racer]

pop out your spark plugs and see if you can turn it over with out it blowing your thumb off the spark plug hole. if it doesnt blow it off you have a hole in your piston.

[MILO]

pop out your spark plugs and see if you can turn it over with out it blowing your thumb off the spark plug hole.  if it doesnt blow  it off you have a hole in your piston.

511212[/snapback]

my thoughts exactly

[batoutofshell]

poss busted kicker gear if not the above!!

[87sheerips]

yea, maybe kicker gear b/c the pistons look fine, but the compreession does not blow my thuimb off the plug hole. Really weired b/c the pistons move when you kick it over, theres just nothing there. SO actually the kicker gear must be fine. Hmmmmm kinda fucked up...

[dawarriorman]

Worn rings. The more they wear, the bigger the ring gap gets until the point that they simply can't seal anymore. Hone it and get some rings, and I'll bet you'll be fine.

[87sheerips]

right on

[BKOLFO4]

I think I understand from a statement above, but just to make sure: This is NOT your shee that RB Racing just ported is it?

[87sheerips]

I think I understand from a statement above, but just to make sure: This is NOT your shee that RB Racing just ported is it?

511344[/snapback]

 

 

no no no no no no no no, its my buddys shee. The RB cylinders are runnin strong!!!!!!!!!!

[87sheerips]

ohhhh here we go, both rings on the right were snapped.