R-O-B Posted April 23, 2006 Report Posted April 23, 2006 (edited) Is there a piston with the pin height raised 9mm so a spacer plate doen't have to be used with a +4 crank with 155mm rods? I tried a search and nothing came up. Edited April 23, 2006 by R-O-B Quote
lowriderb Posted April 23, 2006 Report Posted April 23, 2006 155mm rods?? do you think maybe they are 115mm rods (4mm long rod crank)? wiseco 795 series pistons.. they are in all the stock bores.. Quote
fastbanshee4u Posted April 23, 2006 Report Posted April 23, 2006 Just make sure you dont defeat the purpose of a stroker. Quote
R-O-B Posted April 25, 2006 Author Report Posted April 25, 2006 Woops!!!! I meant 115. Thanks for the reply. Quote
bansheeseat$$ Posted April 25, 2006 Report Posted April 25, 2006 (edited) If you're going to run a +4 stroke with +5 long rod(115mm)in stock cylinders you will have to run the 795 series pistons and either a plate or domes relieved for the +4 stroke or have your stock cylinder head relieved for the +4 stroke. Edited April 25, 2006 by bansheeseat$$ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.