Craptor Jetting

[Soupbox660]

Ok, I've asked this before, but I need to double check because I forgot what everyone said. Here is what I've got

 

686 11.1 JE Piston

Stage 2 Hotcam

FMF Powerbomb header with Powercore 4 muffler

K&N Filter

And right now, I'm running with the air box lid on because it holds the filter on and I cant afford the adaptor yet, but I am removing the air intake tube.

 

Now, I'm using GYT-R needles and a 25 Pilot Jet, but what notch do I set the clip on. Its either 3rd or 4th, but I don't know exactly. And what mains do you recommend I run? The kit comes with 160 for the left carb and a 165 for the right, and I've been told 3 turns out on the screws on the right and 3 1/2 on the left.

 

So, the questions are?

 

Which notch on the needles?

What mains? (bigger than 160 and 165?)

How many turns out?

And should I run that 25 Pilot, or the stock one?

 

Thanks guys

[biggun6ss]

You can probably get a better answer at www.yfzcentral.com. It's just like bansheehq but for four strokes.