midknight Posted April 6, 2006 Report Share Posted April 6, 2006 Ok here we go 06 banshee (was stock) 2500 feet elevation mods under way are Rocket pipes, trinity shaved head, k&n clamp ons, vf3 reeds from what i have researched i think 340 mains 32.5 pilots and 4th clip down on stock needles but............i dont know shit yet so what do you guys think??? Quote Link to comment Share on other sites More sharing options...
biggun6ss Posted April 6, 2006 Report Share Posted April 6, 2006 That all looks good but I don't think you will need that big of a pilot jet. Quote Link to comment Share on other sites More sharing options...
sheefreak Posted April 6, 2006 Report Share Posted April 6, 2006 I agree. I would think 27.5 or 30 at the largest at your altitude. Never jetted rockets, but I would think you would definately be safe at that starting pint for the mains. I think you are going to find you are a little rich, but that is ok to start. Quote Link to comment Share on other sites More sharing options...
banshdog Posted April 6, 2006 Report Share Posted April 6, 2006 That all looks good but I don't think you will need that big of a pilot jet. 498089[/snapback] I concur. Quote Link to comment Share on other sites More sharing options...
midknight Posted April 7, 2006 Author Report Share Posted April 7, 2006 Thanks for the input! i will go with the 3.0 pilots instead. Is the stock needle ok or do most people change them? also on the jetting faq page it says to go one clip leaner on the neddle for aftermarket reeds but if the reeds flow more air then why would that be? And if stock position is 3rd clip and i move it one clip richer for the other mods and one clip leaner for reeds then i am in stock location Quote Link to comment Share on other sites More sharing options...
midknight Posted April 8, 2006 Author Report Share Posted April 8, 2006 ??? Quote Link to comment Share on other sites More sharing options...
biggun6ss Posted April 8, 2006 Report Share Posted April 8, 2006 Try some 340's for the mains, clip on the 4th position, and 30 pilots. Take it out for a ride and look at your plugs. The jetting fact page just gives a good starting point on where you should be, then it is up to you to fine tune your machine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.