LeadBoots Posted March 21, 2006 Report Posted March 21, 2006 i got it running it will start but it still takes alot of kicks. but when it starts it just revs up like crazy and wont idle down. what would that be the carbs sticking? Quote
Wicked98Shee Posted March 21, 2006 Report Posted March 21, 2006 check ur slides and make sure they're closing all the way. just my .02 Quote
ogre03 Posted March 21, 2006 Report Posted March 21, 2006 (edited) I'd start by cleaning your carbs and see what that does for you. You also may want to spell it banshee... Just a thought Edited March 21, 2006 by ogre03 Quote
LeadBoots Posted March 21, 2006 Author Report Posted March 21, 2006 yes i know its wrong. but i dont no how to change it. i will clean the carbs. Quote
kawiking Posted March 22, 2006 Report Posted March 22, 2006 can you turn down the idle screw??? my new carbs(e bay) did that and it was the idle screw, it had the tors off so the screw was on the side. Quote
LeadBoots Posted March 23, 2006 Author Report Posted March 23, 2006 how do i adjust the slides im not very good with carbs. Quote
trex banshee Posted March 23, 2006 Report Posted March 23, 2006 also make sure that your carbs are all the way on i have seen a few where they think the carb is slid all the way on but the rubber boot kinda folded under and it made it lean out and rev up, but checking your carbs would be first. Quote
mondtster Posted March 23, 2006 Report Posted March 23, 2006 If inspecting your carbs doesn't fix anything I would be looking for an air leak somewhere between the carbs and the motor. You could possibly have a torn carb boot or a balance tube (or boost bottle) that got ripped off, etc. Quote
Tim C Posted March 23, 2006 Report Posted March 23, 2006 Check the choke tube (small black hose) that runs between carbs Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.