BrianEb Posted March 20, 2006 Report Posted March 20, 2006 I want to do the TORS elim kit myself but don't want o F-Up my carbs when drilling or tapping can anyone give me any pointers and pitfalls on what to use Quote
batoutofshell Posted March 20, 2006 Report Posted March 20, 2006 you have to grind the angle pieces straight anddrillstraight & level otherwise they will leak. tap them slow that is soft metal Quote
BrianEb Posted March 20, 2006 Author Report Posted March 20, 2006 So put the carb in a vise what size drill bit? Also I can't picture what part is angle pieces I have to grind Quote
Mike98shee Posted March 21, 2006 Report Posted March 21, 2006 Your Tors kit should come with the drill bit and tap if im not mistaken. I put mine on last year and it came with everything I needed. I think I bought my kit from Vito's. Quote
FasterThanU90 Posted March 21, 2006 Report Posted March 21, 2006 take it very slow and keep the tap really lubricated if u have sum WD-40 layin around that should work, work it in slowly then back it out go in further then back it out repeat till its all the way through and after each time u take the tap out blow out the shavings just take ur time and it should work out really well. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.