toomy twist thottle install

[2strokersteve]

it runs real ruff when I start it once i give it trottle it just blubbers but it does not die any one know ??????????

[banshee tuner]

Sounds to me like your slides might be in the wrong carbs but I can't tell for sure from the picture. The cutout should face the air filters.

[2strokersteve]

i checked that and they look right the cut out part on the bottom of the slide is to the air filter

[batoutofshell]

you will now need to re adjust evrything idle and the cable adjustment at the handle

[2strokersteve]

what do i have to re adjust every thing works proper slides are in sequence all most like it is not getting enough fuel the flow of fuel to the carbs is plenty

 

please help

[2strokersteve]

completly took apart and put back together it starts up and idles perfact sounds good the second i give throttle boggs out and blows smoke ???????????

spark plugs are new jets are clean(220 MAIN) needles are good (2nd slot down)

new idle screws are good slides are in good throttle is adjusted good fuel supply out of tank good what should i be looking at???????? I fallowed the instructions perfact WTF am i missing

 

please help im getting

[2strokersteve]

solved the flipping e brake was on give me the daily dumb ass award

[rjvoight]

solved the flipping e brake was on give me the daily dumb ass award

472005[/snapback]

 

 

I'm a little behind the thread but I had to post only cause I have been there. From one self inflicted dumbass award winner to another . What sucks is tearing stuff apart over and over againg and then realizing you never had to! Take it easy dude.

 

RJV