Infamous039 Posted February 9, 2006 Report Posted February 9, 2006 (edited) I just got my 1994 Banshee up and running. When at idle the right side has barely any smoke coming out, but when I hit the throttle it evens up and fires like the left. I was racing my friend and at the end my bike was spitting fire out of the right silencer. When I looked inside the right silencer it was fire glowing and smoking real bad (Blue Colored Smoke). I dont know whats wrong, but it still runs great when I ride it and it starts on first kick with no problem, has spark and compression is excellent. Could it be Rich Jetting or is the Packing in my Silencer no good. Please Let Me Know What To Do??????????? Mod's Open Airbow with Uni Filter FMF Fatty Pipes with FMF Silencers +4 Timing Advance 1999 Banshee Electrical Upgrade Stock Carbs with TORS removed (280 main jets) Bored .40 over Wiesco ( Done A Week Ago ) Edited February 9, 2006 by Infamous039 Quote
Bansheeduner02 Posted February 9, 2006 Report Posted February 9, 2006 probably blew the cylinder or got sand in it some how. same thing happen to my budddys. Quote
Infamous039 Posted February 9, 2006 Author Report Posted February 9, 2006 First time ridng it on the street today with new rebuild, both cylinders are firing when i Hit the throttle. It runs great, but not at idle, it is popping but not consistantly only when I hit throttle it pops consistantly. Quote
akita8 Posted February 9, 2006 Report Posted February 9, 2006 You might want to make sure you have the choke tube installed between the carbs. I would think that a fire in the pipe would mean your running lean. If the carb tube is not on it will suck air through the hole and into the rt carb. Quote
ellison445 Posted February 9, 2006 Report Posted February 9, 2006 Fire and popping is not a rich condition, thats a lean condition. Whats your elevation? Have you cheaked for a air leak? Quote
Infamous039 Posted February 9, 2006 Author Report Posted February 9, 2006 How can adjust it from running Lean????? also I have checked for an air leak everything is good?????????? Quote
Cotton eyed Joe Posted February 9, 2006 Report Posted February 9, 2006 How can adjust it from running Lean????? also I have checked for an air leak everything is good?????????? 471123[/snapback] Put a bigger main jet in it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.