Quadracer18 Posted January 9, 2006 Report Posted January 9, 2006 (edited) I bought +2+1 a-arms and put them on. They look about the same width compared to stock. So i want to make sure they didnt accidentally send me the wrong length. Can someone please give me the lengths of the top and bottom a-arms and also the tie rod length for either a stock setup or a +2 setup ASAP thanks. Josh Edited January 9, 2006 by Quadracer18 Quote
locogato11283 Posted January 10, 2006 Report Posted January 10, 2006 id say just measure the stock arms and the +2s you have and see what u got. there should be a very noticeable difference. measure your tie rods. measure stock and then the aftermarket. there should be a noticeable difference there as well... Quote
Quadracer18 Posted January 10, 2006 Author Report Posted January 10, 2006 I would but i dont have the stock ones anymore, i sold them when i knew i was getting aftermarkets. Quote
locogato11283 Posted January 10, 2006 Report Posted January 10, 2006 hmm maybe someone with some stock length arms will chime in then... Quote
FIRST BANSHEE Posted January 10, 2006 Report Posted January 10, 2006 I believe my banshee is 43 inches wide, outside of front tire to outside front tire. with +2 you should be around 47" . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.