Quadracer18

hey man, sorry...my computer has been acting weird,i didnt get any emails or anything.... i think everythings okay now and i sent you an email, let me know whats going on.... im ready to get this bike outta here so i can get some money in the bank, thanks, Josh

bump $3K

nope. i want to either trade for a 400ex, z400,250r or dale or sell it $3,100.00 OBO or ill just keep it if i dont get any reasonable offers around 3100 or trades

Im looking into going back to the thumper so i will think about any reasonable trades you have. I want a more MX friendly quad but if i dont get the right offers ill just stick with this for the season. 2002 Yamaha Banshee +2+1 a-arms caster and camber adjust w-heim joints (Brand new, never used, lifetime warrenty) +2+4 adjustable axle (brand new, never used, Lifetme warrenty) 2-1 Motofast pipe & silencer Contra Graphics (brand new) nacs seat cover powermadd handguards renthal handlebars Tag bumper (brand new) Kenda Klaws all the way around (85% left) pro design kill switch proflow intake w/outerwears Dg alloy series nerfs Dg swingarm skidplate ripperracing brake blockoff fmf advanced ignition fmf boost bottle dg grab bar and more...

heard they may fit banshee, not sure though so dont hold me to it. Need to go now, will ship immediatly!

I have a set of stock white Raptor shocks off of a 2002 raptor. Need to sell ASAP, already boxed up and ready to ship, will accept paypal or money order. Any reasonable offer and these babies are yours. Let me know...

60 shipped OBO

White raptor shocks off a 2002 for sale. 70 shipped.

Its deffinatly the carbs, the bike ran beofre i switched them and now it wont run. Like i said, i already tested for compression and spark and everything there checks out. I also dumped gas through the spark plug hole and it fired right up that way. I know its the carbs, ive cleaned them and also cleaned the pilot and maints out, everything is clear. Im at a loss.... I have honestly no clue now. can someone post a pic of the bottom of the carb opened up to make sure everything is installed correctly, maybe i installed the main wrong with the washer or something because neither of the carbs will fire each cylinder... HELP!!

OK, i have another post in this section about not ebing able to get my shee started and it has to do with the carbs not getting gas to the engine. Now. I bought these stock carbs off this forum and The guy that had them before me cut the TORS wires on the carbs, would this keep the bike from starting, if so what can i do the get it to start without getting the TORS elimination kit, i need help fast because i have a race this weekend and no time to buy another set of carbs or anything! please help. BTW, the engine fires right up if i pour gas through the spark plug hole, i know it has to do with the carbs, the floats arent stuck, the jetting is correct and the carbs float bowls are getting fuel.

thamks for the info dave, deffinatly will send pics of the race if i can get her running. Ill have to check the throttle cable. I have the TORS wires cut on the carbs, would this keep it from starting? ANY hlep appreciated.

If the reed cages were installed upsidedown would that play a role in not alloing it to start? Also can someone explain to me about the float? I dont think they are switched wrong because i havent taken them off the carbs. ALSO: can some one tell me what a good needle position would be for a banshee with a 2-1 motofast pipe and a pro-flow intake with outerewears. thanks!! Would an FMF AOF ignition have anything to do with it not starting?

alright, im running about the right main for the mods i have, i got the pro-flow intake and a 2-1 motofast pipe. Im running 260 mains 25 piton and 2 1/2 turns out on the air screw, im not sure what the needle position is but that shouldnt affect the bike at least firing up, could this have something to do with the tors? I have the wires clipped off.... I have no clue why this bike isnt at least sputtering any help is appreciated.

I have a race sunday and i need help quick, I put stock carbs in that i bought off this forum and they were cleaned and such. I need to know what the stock main, needle and pilot settings are if anyone can help. The problem im having is that the carbs are not pumping gas into the cylinders whatsoever, i put gas directly into the cyliders by dumping it through the spark plug hole and it fired right up so im at a loss. how many turns out is the fuel/air screw. I alos took the bottom of the carb off and there was fuel in there so i know its getting into the bottom of the carb.... im at a loss and i have a race sundays, anything you can think of would help greatly, Thanks!!!!

Im looking for a rear fender, full fender, not race cut. Black, blue or white. Im also looking for some nerf bars and also a set of front shocks, YFZ's, stock, works etc... Let me know

Im looking for a set of stock shee shocks, will pay with paypal or MOn let me knwow what you have, color doesnt matter.

hey man. I got a nice NOSS cool head. 21cc domes fantastic shape and already cleaned. ready to go already boxed and good to ship. ill take $125 shipped, includes o-rings. They are used but im sure you could get by with them cause they are in perfect shape> let me know man, they wont be here long!

bump

still got it. Make an offer, will ship immediatly, accept paypal or MO

make reasonable offers.

want yfz front shocks or cheap works shocks. I have a noss cool head id be willing to trade also.

I have the old style noss cool head. perfect condition. I belive 21cc domes. Will sell for 150 shipped or for a set of yfz front shocks. Let me know~!

my sig. can someone make another?

nope

I was wondering if someone could take this pic of my quad and put a cool backround behind it along with this: Josh Livezey #18 MX D6 Thanks!