..xXBansheeXx.. Posted January 1, 2006 Report Posted January 1, 2006 How in the freak do you get these ac racing nerfs on the banshee. are my T6 pipes in the way. what do i mount the tab on the front of the nerf to? i tried to upload a pic but it wont let me. and why is it that when you order something they refuse to send instructions? Quote
Hulio-mv Posted January 1, 2006 Report Posted January 1, 2006 mine went to the front motor mounts but be prepared for a struggle mine were a bitch to get lined up you will need prybars and floorjack oh yea if you bought the propegs with heel gaurds the left one will slide in and out on the peg replacement i called ac because like you no pictures to follow ac said to drill a hole all the way through and bolt it then the left side imo needed a brace to the frame so i added one of them also Quote
..xXBansheeXx.. Posted January 2, 2006 Author Report Posted January 2, 2006 yeah I finely figured it out it took some time and some patience but I got r dun. I had to take off the front plastic and the t6 Quote
..xXBansheeXx.. Posted January 2, 2006 Author Report Posted January 2, 2006 if i could upload one that is Quote
alien Posted April 10, 2006 Report Posted April 10, 2006 they are a pain. i had to use longer bolts to go in the front and put nuts on the inside to hold the front support bracket. bolt your peg stub first and slide the bars over them. i had to use a board or something similar to tap the two halves together in the front. Quote
Eazy Posted April 11, 2006 Report Posted April 11, 2006 Those look pretty cool. If ya dont mind me askin, but what did those run, price-wise?? Quote
Dead Op Posted April 13, 2006 Report Posted April 13, 2006 Imjust bought my Pr pegs for 209 out of hellbound racing in NE pa Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.