pimp559 Posted January 1, 2006 Report Posted January 1, 2006 Does anyone know if wheels off a 1999 F-350 will fit on a 2002 Gmc 3/4 ton? Quote
3ban5shee0 Posted January 1, 2006 Report Posted January 1, 2006 Does anyone know if wheels off a 1999 F-350 will fit on a 2002 Gmc 3/4 ton? 453883[/snapback] no im preatty sure gmc has one more lug nut then fords im not real sure tho Quote
Motoman991 Posted January 1, 2006 Report Posted January 1, 2006 yea, i also think they have one more lug but im not positive either Quote
pimp559 Posted January 1, 2006 Author Report Posted January 1, 2006 Your saying Ford has 9 lugs instead of 8 like my GMC? I don't think so. Next! Quote
it's stolen Posted January 1, 2006 Report Posted January 1, 2006 no they will not fit. they both have 8 lugs but the bolt circle is a different diamiter. Quote
beatme Posted January 1, 2006 Report Posted January 1, 2006 ford and dodge are interchangeable, not chevy Quote
ogre03 Posted January 2, 2006 Report Posted January 2, 2006 I remeber something about ford having 7 lugs on some 3/4 tons in the past or some shit. I'm guessing that's what the other guys were talking about Quote
slowpokebanshee Posted January 3, 2006 Report Posted January 3, 2006 I believe they will fit, bolt pattern should be the same. sometimes you run into a problem with actual axle being to big to fit through center of wheel....ie. all the big three use the same differentials made by AAM (American axle Manufactuerers) all the internal components are interchangeable, what won't be is if you are taking a wheel from a 9 1/2" eight lug and go to 10 1/2 or 11 1/2 because of axle size but since you are going from a 1 ton to a 3/4 ton, I am guessing to a smaller rear end, still eight lug, it should fit. bottom line give it a try. Quote
it's stolen Posted January 3, 2006 Report Posted January 3, 2006 ford and dodge are interchangeable, not chevy 453996[/snapback] not true, I putt a set of 99 dodge wheels on my grandpas 72 gmc and they bolted right on. the chevy wheels will not fit a dodge because the hole in the center of the wheel is smaller. 98 and newer superduty wheel will not fit dodge or chevy because they use a metric bolt pattern. ford 170mm / 25.4 =6.69 inchs chevy and dodge =6.5 inchs Quote
beatme Posted January 3, 2006 Report Posted January 3, 2006 let me reitterate: when I had my '98 ram 2500 I could fit '98 ford wheels on it but not '98 chevy wheels and vice versa. That it what my reply was based on. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.