STROKER banshee

[momo20]

i just rebuilt my whole engine...well i still have stock carbs , but i did the porting on the cylinders, still have the stock reeds, i do have a cool head and tommey t-5 pipes,and some dlnoss STROKER 21cc domes i also live in pueblo colorado where our elevation is like 4800 feeti think...its close to that....i just dont know what to jet my shee at

[broke]

You have stroker domes, do ya?

 

You might have to go into a little detail.

 

Does Dave advertise those?

 

Did you go with a stroker crank?

 

I may be misundestanding something or I'm just an idiot.

[momo20]

you have to ask for em...the make it to where you dont have to use a head gasket....pretty nifty if i dont say my slef....and top quality...and yes i have the stoker crank with stoker pistons

[thegroup]

all that sounds like is a cold head with inter-changable domes

[trex banshee]

no what i think he ment to say was you don't have to use a BASE PLATE. the domes are cut(making more room for the piston on its 4mm longer stroke) so you can somewhat "hide" your stroker crank.

[thegroup]

no what i think he ment to say was you don't have to use a BASE PLATE. the domes are cut(making more room for the piston on its 4mm longer stroke) so you can somewhat "hide" your stroker crank.

406142[/snapback]

hum, i know when i put the stroker crank in my buddy's 03, we didnt need it. the 'shee look like a 350 with a Pro Design cool head, a Trinty 34 or 35 single carb and T6s, not a 400 with wisecos (got the kit from alba)

Edited August 19, 2005 by thegroup

[trex banshee]

hum, i know when i put the stroker crank in my buddy's 03, we didnt need it. the 'shee look like a 350 with a Pro Design cool head, a Trinty 34 or 35 single carb and T6s, not a 400 with wisecos (got the kit from alba)

406153[/snapback]

 

 

so you are saying you didn't use the spacer plate or get the head modded for the extra stroke? did you use the stroker pistons?

[dlnoss]

I don't advertise the stroker domes but I should add them to the web site. They tend to be 'custom' so I don't keep many on the shelf. I also make 68mm domes, Blaster piston domes, a variety of Cub domes, and 'spec' domes where a builder gives me the specs they want.

[thegroup]

http://alba.buyol.com/Item/BAN%2D400%2DSTROKER.htm

 

here's the kit if u want to look. only thing was that i had to call in a special order on the pistons b/c the comes with stock bore and we need the next bore size up and this kit, OMG! just like the kit says, "It will feel like you're riding a whole new quad!" spend all six gear in a ten ft. line on lightly wet grass

[trex banshee]

http://alba.buyol.com/Item/BAN%2D400%2DSTROKER.htm

 

here's the kit if u want to look. only thing was that i had to call in a special order on the pistons b/c the comes with stock bore and we need the next bore size up and this kit, OMG! just like the kit says, "It will feel like you're riding a whole new quad!" spend all six gear in a ten ft. line on lightly wet grass

406160[/snapback]

 

ok i see i bet the domes are already set up for a stroker crank so you are right you didn't have to use the plate.

[thegroup]

ok i see i bet the domes are already set up for a stroker crank so you are right you didn't have to use the plate.

406381[/snapback]

 

YES!, point for ME!

[trex banshee]

yeh yeh yeh whatever

 

just kiddin ya man.