Questions about my new clutch

['shee]

I just replaced my clutch yesterday. It works well and everyting, but i had a couple questions. I put in heavy duty springs, are they going to loosen up at all? And is it fairly hard to find neutral on your banshees?

 

I will be at a dead stop in first gear with the clutch pulled in and i will rev it up, the bike will slowly move foreward. The clutch cable is adjusted right, and the clutch mechanism adjustment has been performed.

[NYUK]

not finding nuetral is normal. if the springs are too stiff, put 3 stockers back in ,every other one.as for the creeping, tryand bend your clutch lever out a lil bit,it will give a lil more leverage.if you don t have some fancy clutch lever.

[RNBRAD]

I just replaced my clutch yesterday.  It works well and everyting, but i had a couple questions.  I put in heavy duty springs, are they going to loosen up at all?  And is it fairly hard to find neutral on your banshees? 

 

I will be at a dead stop in first gear with the clutch pulled in and i will rev it up, the bike will slowly move foreward.  The clutch cable is adjusted right, and the clutch mechanism adjustment has been performed.

399076[/snapback]

 

No your spring should not loosen. Torque them at 7ft/lbs and the spring tention will keep the bolt from loosening. As for the banshee lurching in gear, mine has done that since day one.

[locogato11283]

As for the banshee lurching in gear, mine has done that since day one. 

399081[/snapback]

id say you need a better clutch setup then. mine doesnt do it at all since iinstalled all my FAST stuff..

[racer]

mine moves a lil when the oil is still cold. but once its warm it stops.