GEARMADE Posted July 23, 2005 Report Posted July 23, 2005 got a set of used set of vforce 2 having problems with the rubber boot between the carb and the cage wount go together got 2 rubber things sticking out that went inside the stock cages cant go inside the deltas please help thanks Quote
holeshotkid Posted July 23, 2005 Report Posted July 23, 2005 The two pieces of rubber on the boots have to be trimmed flush with the mating surface in order to use them with the Delta Reeds. Quote
r2n2d Posted July 24, 2005 Report Posted July 24, 2005 I just put v-force 3's on my shee and now it is back firing. I am not sure what jetting the bike has. I sent it to the shop and they did it. Now I am going to try to do it. because it gets costly. Well I have the v-force, K&N airfilter, FMF SST pipes and sil. I ride sea level and at most 500 ft above sea level. the temp is from 60 to 90 degrees. What size jets should i use. Quote
BansheeBillyBob Posted July 25, 2005 Report Posted July 25, 2005 start at like 270 and work from there.....and those lil rubber things need to be cut off Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.