banshee cams?

[BB3]

Check this out might go ahead and by one for me shee, what you all think?

 

INSTALLATION KIT

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=43972

[.]

I've got that exact set and everybody on here should get one. It made installing and tuning my cam a dream compared to the old make sure you tie a rope on the timing chain so it doesnt drop down into the bottom end method.

 

Great find.....this should be a stickie!

[racer]

i make my own cams, so its not really needed in my garage.

[DarkBuDDha]

nice find. anyone want to help me install my cams on the shee

[broke]

That's fucked up.

[Cotton eyed Joe]

That aint nothin. I make aluiminum cams. Light weight, so less rotational mass, means higher HP. I sell them with titanium spring retainers, high ratio rockers, and hole through pushrods.

You have to use taller valve covers on the Banshee due to the increased rocker height.

 

$40.00 for the whole kit.

But its $40 to ship it, ($80.00 total) because It will be a little bigger than an ordinary red house brick. Probably weigh about the same as a brick too. But your cam kit will be inside thats for sure, and not a brick.

[XxMeltIcexX]

That aint nothin. I make aluiminum cams. Light weight, so less rotational mass, means higher HP. I sell them with titanium spring retainers, high ratio rockers, and hole through pushrods.

You have to use taller valve covers on the Banshee due to the increased rocker height.

 

$40.00 for the whole kit.

But its $40 to ship it, ($80.00 total) because It will be a little bigger than an ordinary red house brick. Probably weigh about the same as a brick too. But your cam kit will be inside thats for sure, and not a brick.

380651[/snapback]

 

let me get back to you on that, ive been lookin for a new cam for my shee

 

Eric

[banshdog]

That aint nothin. I make aluiminum cams. Light weight, so less rotational mass, means higher HP. I sell them with titanium spring retainers, high ratio rockers, and hole through pushrods.

You have to use taller valve covers on the Banshee due to the increased rocker height.

 

$40.00 for the whole kit.

But its $40 to ship it, ($80.00 total) because It will be a little bigger than an ordinary red house brick. Probably weigh about the same as a brick too. But your cam kit will be inside thats for sure, and not a brick.

380651[/snapback]

 

Could this particular Banshee cam be successfully thrown through a plate glass window?

[applpro]

Check this out might go ahead and by one for me shee, what you all think?

 

INSTALLATION KIT

http://cgi.ebay.com/ebaymotors/ws/eBayISAP...&category=43972

380257[/snapback]

are they for solid lifter or roller cams??

Edited June 13, 2005 by applpro

[BB3]

Hopefully roller for more um power i hope.

[Cotton eyed Joe]

Could this particular Banshee cam be successfully thrown through a plate glass window?

381240[/snapback]

Yes it could. Thats why I won't be enclosing my mailing address.