Tx-Motocross Posted March 24, 2005 Report Posted March 24, 2005 I know this probably is against Bansheehq's policy but I've got a simple question about the Blaster. I just picked up an 01 blaster for my wife the other day. well On top of the case there is a nipple that has a vent hose on it. She has rode it a few times but the other day oil started coming out of the vent hose. We filled up the tranny oil to the correct level, but it still squirted out of the vent hose. I tried leaving a post on blasterhq but nobody could really help me... the oil is not coming out of the case seal (where u split the cases in half) its coming out of the nipple that has the vent hose attached ot it... the oil is actually vented all the way to the front of the bike. the oil that comes out has lots of tiny bubbles. ANy help to solving my problem is greatly appreciated. hopefully this post will make it the the main board and not rejected. THanks, Tx-Motocross Quote
racer Posted March 24, 2005 Report Posted March 24, 2005 there is a thread going on here as we speak about this topic, but on a banshee. im not sure if anyone has decided the true cause yet, but heres the hyperlink to it. THREAD Quote
Yamahammer Posted March 24, 2005 Report Posted March 24, 2005 had the same problem with the wifes did it since i bought it ,, then the clutch got burned up due to someone not checking or letting me know it was comming out really bad... any how. i replaced the clutch and also both crank seals and not a problem since... Quote
locogato11283 Posted March 24, 2005 Report Posted March 24, 2005 its just a simple oil breather tube but the real question is why its coming up out of there. im assuming some type of air is getting in there and forcing it out. i would say its gotta be the crank seal like yamahammer was talking about. thats about the only way that air could be forcing the oil out. Quote
PUSH THE THROTTLE Posted March 24, 2005 Report Posted March 24, 2005 its just a simple oil breather tube but the real question is why its coming up out of there. im assuming some type of air is getting in there and forcing it out. i would say its gotta be the crank seal like yamahammer was talking about. thats about the only way that air could be forcing the oil out. 344532[/snapback] Thanks for posting what I was thinking Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.