cheetah cub cylinders

[Big Blue]

From they dyno runs ive seen they produce 15-20 more hp.

[sheefreak]

The cubs produce 15-20 more horse? Thats amazing, can anyone else vouch for this. From what I've heard Jims cylinders rip.

[Big Blue]

http://www.bansheeracing.com/cheetahcub.htm here are the dyno runs with just a clean up port work done. the cubs are a far better design they are based on the big cheetah stock cylinders are limited by their design.

[01bansheeke]

i've seen passion 12 ports barely put out 70 hp....these cylinders pretty much anihilate any stock cylinder out there out of the box.

[Big Blue]

my stock stroke make right at 70 for a dune port. i want to build a 4mm or 7mm cub though.

[sheefreak]

Thanks for the info guys.

[bansheefreestyler]

are they used for dragging or dunes?

[01bansheeke]

dunes and draggin

[1800bigk]

Can anyone vouch for how these cylinders perform compared to Passion 12 port, I think the cost is similar.

341276[/snapback]

Edited March 19, 2005 by 1800bigk

[g_low0885]

can you used the cubs if you do mostly woods riding

[g_low0885]

can you used the cubs if you do mostly woods riding

[01bansheeke]

sure you can. You are going to have one strong thumb..and one hell of a clutch hand. lol. THEY aren't really designed for that, but i suppose you could ride them in the woods.

[89Steeda]

I soaked the studs with penetrating oil overnite. Then hit the case with heat. First one came out just fine. Second twisted then broke. Got the studs at the dealer. Same size as the 2 rear center cylinder studs.