i need a little advice

[rujones10]

ok well i got sand in my motor so i tore it apart, my pistons have chuncks missing, my top ring on each cylinder was only half there, my head one side is all black and knicked up and the other side looks fine and my cylinders look a little scarred but not to bad . i wanted to get soem opinions on what i should do for the rebuild i dont have teh cash to spend millions but if i can stay around 1500-2000 dollars i was wanting to know what parts are good and wich ones suck ass so if you guys could help me id apreciate it oh yeah by teh way its a 2004 with t-5 pipes and a uni-filter other than that teh motor is stock

 

 

thanks

[sheefreak]

Replace that head w/ a NOSS head.

[05bansh]

Get yourself some wiesco pro-lite pistons and rebuild that top end!!

[locogato11283]

i would check into getting the new cheeta cub cylinders, wiseco pistons and a noss head. that should be all you need and you can do all that for under 2000 bucks. plus youll have a monster of a machine. the cylinders are 875, pistons about 150 and head about 250. thats what id go for.

[kw04]

i'd do the the same arm ripping power

[stclark816]

i would check into getting the new cheeta cub cylinders, wiseco pistons and a noss head. that should be all you need and you can do all that for under 2000 bucks. plus youll have a monster of a machine. the cylinders are 875, pistons about 150 and head about 250. thats what id go for.

325284[/snapback]

 

 

Do that, then report back on how it runs.

[rujones10]

ok i took my stuff in today im getting it bored 20 over shaving teh head and porting teh exhaust port for $550 is that a decent price? im also going to get dual 35mm carbs and new reeds does that sound like it will be decent