wingerdingershee Posted February 14, 2005 Report Posted February 14, 2005 (edited) I need some help jetting my banshee. I'm going to be riding at glamis mainly which is pretty much sea level. Temperature is around 50'-60'. Main jet? THANKS IN ADVANCE! My Mods: -Rocket Pipes(In Frame) -Keihin 28mm PWK's -K&N Pod Filter(Clamp On) -everything else is stock! Edited February 15, 2005 by wingerdingershee Quote
gonzarello Posted March 12, 2005 Report Posted March 12, 2005 I need some help jetting my banshee. I'm going to be riding at glamis mainly which is pretty much sea level. Temperature is around 50'-60'.Main jet? THANKS IN ADVANCE! My Mods: -Rocket Pipes(In Frame) -Keihin 28mm PWK's -K&N Pod Filter(Clamp On) -everything else is stock! 323058[/snapback] Did you figure out what jetting you need to run because I'm having the same jetting issue I have Rocket Pipe, 30mm keihn carb, and everything else is stock Quote
hamuel Posted March 12, 2005 Report Posted March 12, 2005 Probly around a 175-185. and a pilot probly 45-52. But the real key is the needle getting it set just right Quote
wesw Posted March 12, 2005 Report Posted March 12, 2005 i have 160 mains in and still a bit rich 1000 ft, temp its kansas changes every 4 hrs Quote
locogato11283 Posted March 13, 2005 Report Posted March 13, 2005 im gonna say 42 to 48 pilot and 158 to 165 main. me and my brothers 33 and 35mm pwk are jetted exactly the same. i think all the pwk carbs are prolly very similar. Quote
rocketboy Posted March 13, 2005 Report Posted March 13, 2005 (edited) i have 28/30mm pwk kehins with rockets vforce k&n and a list of other goodies .im @+1300 elevation 155 mains/ 55 pilots/ needle in middle or down one more notch/ air screw out 1 turn should put you damn close to where you should be at IMO its gonna pull like a mofo too! Edited March 13, 2005 by rocketboy Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.