demon340 Posted February 11, 2005 Report Posted February 11, 2005 Hey i know some of you guys have RZ motor conversions on your shees. What is needed for this?? i know a RZ wireing harness is needed but is anything elese needed? will the RZ bolt up in the stock banshee motor place? how hard is this to do and what am i gonna need for everything?? Thanks guys Quote
banshee tuner Posted February 11, 2005 Report Posted February 11, 2005 You need to contact a guy that goes by meat on this site, he also has the site thebansheezone.com. He has built one and also has a modified banshee. Quote
Meat Posted February 11, 2005 Report Posted February 11, 2005 You'll need..... Rz juggs and head RZ stator RZ powervalve controller RZ harness or make yer own RZ voltage regulator RZ flywheel RZ servo motor custom exhaust flanges wiring skills time and patience Quote
broke Posted February 11, 2005 Report Posted February 11, 2005 Don't forget a battery or some form of eliminator, and the RZ CDI. Quote
banshee tuner Posted February 13, 2005 Report Posted February 13, 2005 What is the cost versus going with a cheetah powervalve setup. Quote
broke Posted February 13, 2005 Report Posted February 13, 2005 It really depends on how cheaply you can get a complete motor or just the parts. I paid around $300 for cylinders and head. $20 for the PV controller, $20 for the PV servo, 100 for the CDI, $150 for startor and flywheel, $30 for the harness, and around $20 for the regulator. $150 for pistons. I paid too much for some of my stuff, but it could probably be done for around $800 if you know someone that can make you some flanges. Quote
Minkia38 Posted February 15, 2005 Report Posted February 15, 2005 do a search - this has been brought up 50 times - MANY good threads out there about it! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.