cudaz101 Posted January 24, 2005 Report Posted January 24, 2005 (edited) OK..Did some mods... Pipe set "FMF" Open air box Used the 290's for mains and left the stock Pilot. Moved the clip to the 4th position. "DOWN" It does not wanna cold start at all...Once it is warm then no -prob. The air screws are as they were. I never messed with them. FMF recomends a #30 Pilot???? I have read on here not to...?? TIA.. Brad Edited January 24, 2005 by cudaz101 Quote
itsmyforte Posted January 24, 2005 Report Posted January 24, 2005 OK..Did some mods... Pipe set "FMF" Open air box Used the 290's for mains and left the stock Pilot. Moved the clip to the 4th position. "DOWN" It does not wanna cold start at all...Once it is warm then no -prob. The air screws are as they were. I never messed with them. FMF recomends a #30 Pilot???? I have read on here not to...?? TIA.. Brad 311218[/snapback] sounds very close to my mods... my elevation is 700 i have 330 mains, sounds like u need to go up. stick with the 25 pilot and move clip second from bottom. Quote
RBD Posted January 24, 2005 Report Posted January 24, 2005 Make sure you don't have the float bowls mixed up...., there is a right and left bowl. The left float bowl has the passage and cold start jet in it and the right bowl has nothing. If you put the wrong bowl on the left carb, the choke will not work. Ron Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.