endofitall9 Posted January 24, 2005 Report Posted January 24, 2005 Hey guys, going through a ground up rebuild on a 91 Banshee, I'm going to have my frame and swingarm repainted and get it all looking nice. I started having troubles when i came to the swingarm pivot bolt, that thing is in there, I've done everything to try and get that thing out and it will not budge, has anybody else had this problem also greese and wd-40 do not budge it, it might as well be welded in there Quote
93blueoval Posted January 24, 2005 Report Posted January 24, 2005 that happens to all the guys around here(alot of rust due to living on an island with salty ass air). the only thing that worked was to set the bike on its side and pound it out with a sledge. Quote
Holyman Posted January 24, 2005 Report Posted January 24, 2005 Check this out... http://www.bansheehq.com/forums/index.php?...956&hl=swingarm Quote
endofitall9 Posted January 24, 2005 Author Report Posted January 24, 2005 thanks alot guys, im going to put it to the test. Quote
98bonerSTOCKshee Posted January 24, 2005 Report Posted January 24, 2005 I had same problem. I was beating the hell out of it with a 5lb sledge no budge, My brother called me a puss whacked it once and it came out..I was scared to hit it hard! just leave the nut threaded til it's flush so it wont harm the bolt or nut!! Quote
rx7500hpt2 Posted January 25, 2005 Report Posted January 25, 2005 I used my dads boschhammer its a mini jack hammer, came out no problem. Quote
locogato11283 Posted January 25, 2005 Report Posted January 25, 2005 BFH and then when you destroy it get ahold of NYUK on this site. hed be glad to sell you one. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.