Bill's pipes

[leadsled]

i run a set on bill's pipes on my banshee and i was wondering if anyone else has used them and compared them to other pipes i think there a decent mid-top pipe, i have yet to see another banshee with them on it.

[itsaripper]

I have seen a banshee with a set of Bills pipes. They had a good low end and midrange. They did not seem to pull as far as FMF fatties. The set of pipes that they are the closest to is the fatties.

[Banchetta]

I rode a shee w/ them, very well tuned in. Good low end, great pull throughout. They are nice all around pipes when jetted properly. I'd have to agree that they are very comparable to the fatties.

[sp1tekiller]

A long time ago I owned a Blaster and put a Bill's silencer on it. It worked good. Sounded nice too.

[Dr. Overkill]

My previous bike had Bills pipes. Had 'em Jet Hot coated:

 

http://members.cox.net/dr.overkill/banshee1.JPG

 

http://members.cox.net/dr.overkill/banshee3.JPG

 

The bike came from Alba with the pipes and their jetting, and I loved it. My current bike had Pro Circuits on it, and it was a total dog until a buddy of mine helped me re-jet it. I don't know how the previous owner tolerated it--it had no bottom or mid range whatsoever, sounded like it was running cold all the time except at wide-open throttle.

 

Now that it's tuned better, it still doesn't have quite the mid-range that my bike had with the Bills, but it's much much better. I was told that the Pro Circuit pipes are simiilar to FMF Fatties, too, so I don't know who to believe, because I wouldn't say that the Bills were comparable to the Pro Circuits (as would be implied by the Bills=FMF=ProCircuit logic).

 

The Bills pipes tuck up better than my Pro Circuits, too, so the Bills don't get as much melted boot junk on them.

_dennis

Edited January 8, 2005 by Dr. Overkill

[Banchetta]

Bills are very comparable to the fatties. Pc 's are more of a top end pipes.

[trail rider]

I have bill's pipes and i think they are pretty good. they sound awesome and have Very good mid range and low end, but I dont think the top is as good as other pipes, but these are the only ones i've tried.

 

Some times when I do wot runs in the fields and stuff, I try whinding out some of the upper gears like 4th and 5th, and it seems like they dont pull as hard when the rpms start to really climb.

 

but the low end on my bike is very good. on level ground, i can start it in 1st with out clutchin it and it will walk away from ya a puttin,

[Caterpillar]

You guys are kidding, right? Bills pipes? lol ... Maybe I have come to the wrong place for info. I have a buddy, he used to run Bills. But he lost every race against Toomey T-5s, FMFs, Pro Circuts, and even my 'Shee, which had stock pipes. The only mod I had was a GYR-T box and a rejet. Needless to say,after losing to my stock YFZ450, he lost the Bills and went with Trinity. I think he has a few other tweaks done now as well. I can't wait to race him again..... Seriously, I don't mean to stir the pot on my first post, but, Bills???...........lol........