locogato11283 Posted December 12, 2004 Report Posted December 12, 2004 well guys i finally got the silver banshee runnin again. new portwork that really fuckin screams. cant wait to get it out on the hills. as for flat drag racing its pretty badass. gets off the line good and tears ass on top, i think the rockets prolly help with that. anyway, friday im plannin on hittin the dyno and gettin some numbers with my rockets, cpi's and t5's. so maybe we will finally see what builds more power. im sure the t5's will build the least but the real contest is between the rockets and cpi's. im planning to schedule dyno runs on friday so hopefully theyll have time open so that i can get mine, and my brothers in there. anyone wantin to see what kind of power eric gorr's woods port is making will soon know. stay tuned!! Quote
cjm02ram Posted December 12, 2004 Report Posted December 12, 2004 How much HP are you hopeing for? Also does it feel stronger than you Passion on top end? Quote
banshee76179 Posted December 12, 2004 Report Posted December 12, 2004 Yeah, As a matter of fact, I just got through tearing mine all down... Will be sending mine off to him prolly by the end of the week... Chris Quote
banshee04le Posted December 12, 2004 Report Posted December 12, 2004 Sweet! Are you going to tune the carbs for best results with each set of pipes... fine tuning the needles as well as the mains? Can't wait to hear what you find out. Quote
locogato11283 Posted December 12, 2004 Author Report Posted December 12, 2004 How much HP are you hopeing for? Also does it feel stronger than you Passion on top end? 292324[/snapback] there is no comparison. this engine puts my passion 4mm to shame. theres no dead spot in these cylinders like i had with my passion cylinders. it pulls so much harder than the passion cylinders. im not sure on the hp. builder thinks 75 to 85 hp, but we will see. Sweet! Are you going to tune the carbs for best results with each set of pipes...fine tuning the needles as well as the mains? Can't wait to hear what you find out im sure we will be doing the tuning. the builder wants to see what my rockets will do against some cpis. im gonna make sure everything is right on when we do it. i ran it today with some cpis on it and just for feel the rockets felt like they pulled harder. we will see what the dyno says. Quote
white trash Posted December 13, 2004 Report Posted December 13, 2004 Who did your jugs this time around LOCO? Quote
01bansheeke Posted December 13, 2004 Report Posted December 13, 2004 (edited) ^^^^eric gorr Does he offer a dune port? cpi's would probably perform better with a dune or drag port than the woods port, but i guess only time will tell how well it performs on the stroker. Can't wait to hear how it goes. Edited December 13, 2004 by 01bansheeke Quote
bansheefreak Posted December 13, 2004 Report Posted December 13, 2004 there is no comparison. this engine puts my passion 4mm to shame. theres no dead spot in these cylinders like i had with my passion cylinders. it pulls so much harder than the passion cylinders. im not sure on the hp. builder thinks 75 to 85 hp, but we will see.im sure we will be doing the tuning. the builder wants to see what my rockets will do against some cpis. im gonna make sure everything is right on when we do it. i ran it today with some cpis on it and just for feel the rockets felt like they pulled harder. we will see what the dyno says. 292329[/snapback] are you sure you should be tuning this motor????? i don't know maybe someone else should tune it loco. .. we want some good numbers you know.... Quote
locogato11283 Posted December 13, 2004 Author Report Posted December 13, 2004 are you sure you should be tuning this motor????? i don't know maybe someone else should tune it loco. .. we want some good numbers you know.... 292497[/snapback] please someone come tune this for me...shit. its already tuned. didnt take me a year like some people take on their engines after certain portwork... 01bansheeke, gorr doesnt do a dune port. its called a woods port. you need to get up here and ride my brothers. youll see what all the hype is about. for 200 bucks you will not get a better port job. and as a matter of fact i bet itll beat out alot of those $300 to $500 port jobs. Quote
fixitrod Posted December 14, 2004 Report Posted December 14, 2004 With the history and knowledge that Eric Gorr has I can believe his work is good. For those of you that have never heard of Eric Gorr, you can go to www.ericgorr.com and see for yourself. He's a very realistic type... not a bunch of bullshit hype. Quote
wesw Posted December 14, 2004 Report Posted December 14, 2004 what carbs are you running with the new work? Quote
locogato11283 Posted December 14, 2004 Author Report Posted December 14, 2004 With the history and knowledge that Eric Gorr has I can believe his work is good. For those of you that have never heard of Eric Gorr, you can go to www.ericgorr.com and see for yourself. He's a very realistic type... not a bunch of bullshit hype. 292800[/snapback] yea eric is a straight up guy. the guys website is full of useful info on how to make your bike run better without even talking to him or paying for anything from him. thats why i highly recommend him. and when you call his shop he will answer the phone and answer any questions you might have.hes never in a hurry to get off the phone. wesw, im runnin my 35mm pwk's. Quote
wesw Posted December 14, 2004 Report Posted December 14, 2004 you using same jetting as your passion stroker or something different Quote
01bansheeke Posted December 14, 2004 Report Posted December 14, 2004 i would have been up there sunday if it wasn't for this piece of shit truck lol oh well next time you guys ride i'll try and make it. I may have the shee together by then. we will see. the frame and plastics will be done this week. Quote
locogato11283 Posted December 14, 2004 Author Report Posted December 14, 2004 i would have been up there sunday if it wasn't for this piece of shit truck lol oh wellnext time you guys ride i'll try and make it. I may have the shee together by then. we will see. the frame and plastics will be done this week. 292935[/snapback] we will be going this sunday. let us know. wesw, the main is the same but i changed pilots. it runs really strong. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.