Wallrat Posted November 20, 2004 Report Posted November 20, 2004 My engine is fried and I don't have the money to replace everything at once. So I'm gonna be buying this stuff over the next weeks/months. Everything I'm looking for needs to be in new or like-new condition. Here's the list in the order I'll be purchasing: top and bottom cases crank complete clutch assembly 200w stator billet water pump complete gasket kit piston kit (probably .030 over) head stator cover delrin a-arm bushing set pro design shifter new chain/sprockets a-arm frame + upper a-arms Quote
Holyman Posted November 20, 2004 Report Posted November 20, 2004 My engine is fried and I don't have the money to replace everything at once. So I'm gonna be buying this stuff over the next weeks/months. Everything I'm looking for needs to be in new or like-new condition. Here's the list in the order I'll be purchasing: top and bottom cases crank complete clutch assembly 200w stator billet water pump complete gasket kit piston kit (probably .030 over) head stator cover delrin a-arm bushing set pro design shifter new chain/sprockets a-arm frame + upper a-arms 282976[/snapback] Why the heck would you want plastic bushings for your A arms? If plastic was all that good you wouldn't need to replace 'em now. I can get you some bearings instead and should last forever. Unless you never grease your suspension... then get the plastic bushings. Quote
tats4life Posted November 20, 2004 Report Posted November 20, 2004 i got a bushing set you can have.......pm your address to me. Quote
white trash Posted November 20, 2004 Report Posted November 20, 2004 (edited) ive got a stock head, and full set of stock arms and tie rods if you need em... all of a 02 shee Edited November 20, 2004 by white trash shee rider Quote
Wallrat Posted November 20, 2004 Author Report Posted November 20, 2004 I'll move up to bearings after I get the a arms goin...I go through bushings so fast with the j arms that swapping over now would just be a waste of money. Quote
NYUK Posted November 20, 2004 Report Posted November 20, 2004 crank out of a running bike and complete clutch set up. 2 beans shipped. rods are tight.let me know,it will go on e bay mon. night. Quote
Holyman Posted November 21, 2004 Report Posted November 21, 2004 I'll move up to bearings after I get the a arms goin...I go through bushings so fast with the j arms that swapping over now would just be a waste of money. 283028[/snapback] Send me an email and we'll talk[email protected]... Quote
joshv5.0 Posted November 21, 2004 Report Posted November 21, 2004 good to have a place that helps out like this Quote
Wallrat Posted November 23, 2004 Author Report Posted November 23, 2004 Got the crank and clutch taken care of...still need engine cases though. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.