BigRed350x Posted October 19, 2004 Report Posted October 19, 2004 Would it work to hook up the nitrous injector nozzles to the boost bottle on top of the reed manifolds? Or would it be better to hook it up somewhere between the carbs and reeds? I got a nitrous system for a honda from my buddy for like $250 with everything that was on the honda. All the relays and everything. I am trying to think of ways it might be ghetto rigged for a banshee. Definitely going to need some smaller jets. lol. Put the same jets that are meant for a 2.0L inline 4 on a banshee engine. Ha Ha Ha It would probably go like greased lightning for about 2 seconds. If I can't think of a way to stick it on the shee, its going on the Jeep Cherokee. That thing has 246,000 miles on it and I don't really care if I blow that thing up. I figure I will take it down to walden and just romp on it till it explodes. Do the factory nitrous kits out on the market have some kind of fancy manifold they use or what? Quote
loganskinner Posted October 19, 2004 Report Posted October 19, 2004 the last thing i would do is "ghetto rig" nitrous. there are ways to get it done right, just look around. Quote
banshee04le Posted October 19, 2004 Report Posted October 19, 2004 I have seen a kit made for the banshee that comes with a boost bottle that is tapped for the nitrous nozzles so I guess it MAY work, but I don't like it. I would think that some fuel fall out would be inevitable when spraying in such a confined area. I picture some of the fuel running down the sides of the boost bottle, which would mean it's not atomized properly when entering the engine. You need a straight shot right smack dab in the middle of the intake stream for the best performance and reliability. Quote
locogato11283 Posted October 19, 2004 Report Posted October 19, 2004 banshee04le, what you know about nitrous anyway?? Quote
banshee04le Posted October 19, 2004 Report Posted October 19, 2004 Well, since you asked, nitrous oxide or nitrogen (I) oxide, chemical compound, N 2 O, is a colorless gas with a sweetish taste and odor. Its density is 1.977 grams per liter at STP. It is soluble in water, alcohol, ether, and other solvents. Although it does not burn, it supports combustion since it decomposes into oxygen and nitrogen when heated. The gas is prepared commercially by the thermal decomposition of ammonium nitrate, NH 4 NO 3 , at about 240 Quote
locogato11283 Posted October 19, 2004 Report Posted October 19, 2004 Well, since you asked, nitrous oxide or nitrogen (I) oxide, chemical compound, N 2 O, is a colorless gas with a sweetish taste and odor. Its density is 1.977 grams per liter at STP. It is soluble in water, alcohol, ether, and other solvents. Although it does not burn, it supports combustion since it decomposes into oxygen and nitrogen when heated. The gas is prepared commercially by the thermal decomposition of ammonium nitrate, NH 4 NO 3 , at about 240 Quote
banshee04le Posted October 19, 2004 Report Posted October 19, 2004 Ok, you got it! I'll have something in images tonight. I'll show ya what I got going on with it currently . Quote
locogato11283 Posted October 19, 2004 Report Posted October 19, 2004 Ok, you got it! I'll have something in images tonight.I'll show ya what I got going on with it currently . sweeet Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.