Banshee oil going milky

[KiwiBanshee]

Hi there, My Banshee Transmission oil looks like someone poured a milkshake in it, anyone have any suggestion to what the problem could be?? Cheers

[J.J.]

The shaft seal on your waterpump is leaking.

 

Item 3: 93103-10168-00 OIL SEAL

 

While you have the water pump open you might as well get the following items as well.

Item 2: 93306-30003-00 BEARING (B6300Z)

Item 6: 99080-07600-00 CIRCLIP

 

The above parts are dirt cheap so I recommend replacing them regardless.

Also, take a good look at the impeller (plastic part) of the pump shaft for any damage like melting or slipping on the shaft and replace with a Pro Design alloy pump if required.

 

Edit: How rude of me, welcome to the HQ, coupla Kiwis here on the HQ, XTShee being the most regular. Hope to see you posting back once you get this sorted.

Cheers

J.J.

Edited August 29, 2004 by J.J.

[locogato11283]

yep. you are taking on coolant somewhere.

[Forcefed]

Very nice reply J.J. Wish they all could be as informative as that one!

 

Kiwibanshee....J.J. is right on the money...been there and done that a couple of times. Take your time with the bearing and the seal in the cases though...can be a little nerve racking sometimes.

[KiwiBanshee]

Thanks for your help ( Especially J.J Awesome response) Not as many Banshees around in NZ Now all going 4 Stroke. Bloody hard to get parts and mods over here Expensive to..

 

Cheers All

KiwiBanshee