Holyman Posted July 2, 2004 Report Share Posted July 2, 2004 (edited) I just pulled apart the last of my parts banshee and I'm tired of looking at this other stuff laying around here. So to start with I have... Chrome T5's with or without stingers and silencers. 2- Radiators Gas tank with new inserts Coil Factory kill switch Wiring harness with lights cut off Left hand Cylinder. Right hand may be salvagable. You get 2 for 1 Head undamaged Clutch side engine cover... SOLD Airbox lid drilled Tranny gears Shift drum Shift forks Shift shaft Clutch arm Clutch basket Worn but still usable Kicker gear Early swingarm Early Axle with carrier and sprocket 1- upper left Jarm 2- Lower A arms tight ends a couple dings and need a paint job Red Maier rear fender with some scuffs no cracks Light grey tank plastic and rad cover Purple front and rear fenders in bad shape... good for painting or cutting or practicing on. Front master cyl Early rear master cyl, caliper, brake pedal, NEW +12 stainless brake hose Steering stem seems pretty straight factory bars with purple Renthal pad tie rods 1 or 2 bad ends J arm frame if I sell it as is great but I may modify it for A arms while I can and get a few more bucks for it. Tires, tires, tires #################### 2002 Blaster I'm going to part out. Right now it's whole. I really just want to move this stuff so make me an offer... I'll probably take it. I will have pics of everything later today. DO NOT PM ME!!! If you have questions, post them here or email me at IHRbearings@peoplepc.com Edited July 4, 2004 by Holyman Quote Link to comment Share on other sites More sharing options...
Klotzban1 Posted July 2, 2004 Report Share Posted July 2, 2004 Holyman.....One of my stock manifolds tore where the boost bottle goes in. Do you have a set of them you would like to get rid of? Quote Link to comment Share on other sites More sharing options...
superchicken Posted July 2, 2004 Report Share Posted July 2, 2004 about your tranny,is that the cases and all,or just the gears?pm me if ya dont mind.thanx scott Quote Link to comment Share on other sites More sharing options...
Klotzban1 Posted July 2, 2004 Report Share Posted July 2, 2004 Holyman...what shape is the Blaster in? Quote Link to comment Share on other sites More sharing options...
Holyman Posted July 2, 2004 Author Report Share Posted July 2, 2004 (edited) The intake boots are $8 shipping included. The tranny is just the gears. The cases were blown apart. I do have an upper case that was damaged from a thrown chain but did not get to the innards. I have the lower case to match which has about a 1/2 hole in it. I ground out the area to make sure it's not cracked beyond the hole. It looks tight. The Blaster was running fine until it locked up. I'm sure the oil injector went bad because we rode it all winter with no problems. So I really doubt it's an air leak or jetting. Either way the Blaster iscomplete and has a title. I also put Hydro rear brakes on it. The cylinders are bored to 64.10 as far as I can tell. The right hand jug has a chip in the bottom from the rod that snapped. It may be salvagable. I will have pics later on tonight. Email me if you want pics. Keep an eye on the first posting. I will be editing it with stuff that sells and stuff that I am adding to the list. Edited July 2, 2004 by Holyman Quote Link to comment Share on other sites More sharing options...
sheerider4life Posted July 3, 2004 Report Share Posted July 3, 2004 how much you wanting for them T5's? Quote Link to comment Share on other sites More sharing options...
zilladude Posted July 3, 2004 Report Share Posted July 3, 2004 What condition is the clutch cover in? price too Quote Link to comment Share on other sites More sharing options...
Hockey390 Posted July 3, 2004 Report Share Posted July 3, 2004 got any silver rims in good condition that will either fit 22x11x9 rears, or stock fronts? (cant remember size..) Quote Link to comment Share on other sites More sharing options...
Fox73-Zz Posted July 3, 2004 Report Share Posted July 3, 2004 the tie rods with damaged ends, which ends are damaged? I am needing a good outter end. Quote Link to comment Share on other sites More sharing options...
Holyman Posted July 3, 2004 Author Report Share Posted July 3, 2004 (edited) how much you wanting for them T5's? I'd like $275 + shipping for the t5's. What condition is the clutch cover in? price too The cover is in OK shape. There is a groove where the brake lever was rubbing. $25 +shipping. got any silver rims in good condition that will either fit 22x11x9 rears, or stock fronts? I have some silver rims but I want to keep them unless you have some other rims and some $$. the tie rods with damaged ends, which ends are damaged? I am needing a good outter end Do you need the end that is right hand thread or left hand thread? Edited July 3, 2004 by Holyman Quote Link to comment Share on other sites More sharing options...
Holyman Posted July 3, 2004 Author Report Share Posted July 3, 2004 how much you wanting for them T5's? I'd like $275 + shipping for the t5's. What condition is the clutch cover in? price too The cover is in OK shape. There is a groove where the brake lever was rubbing. $25 +shipping. got any silver rims in good condition that will either fit 22x11x9 rears, or stock fronts? I have some silver rims but I want to keep them unless you have some other rims and some $$. the tie rods with damaged ends, which ends are damaged? I am needing a good outter end Do you need the end that is right hand thread or left hand thread? Quote Link to comment Share on other sites More sharing options...
Hockey390 Posted July 3, 2004 Report Share Posted July 3, 2004 got any silver rims in good condition that will either fit 22x11x9 rears, or stock fronts? I have some silver rims but I want to keep them unless you have some other rims and some $$. I've got gold ones for rear... They are perfect, just gold.. How much? Quote Link to comment Share on other sites More sharing options...
Holyman Posted July 3, 2004 Author Report Share Posted July 3, 2004 Send me a pic and what you're willing to give... IHRbearings@peoplepc.com Quote Link to comment Share on other sites More sharing options...
Billyd Posted July 3, 2004 Report Share Posted July 3, 2004 how much for the fenders or all plastics (fenders front and rear, gas tank cover radiator cover? Quote Link to comment Share on other sites More sharing options...
Fox73-Zz Posted July 3, 2004 Report Share Posted July 3, 2004 (edited) the tie rods with damaged ends, which ends are damaged? I am needing a good outter end Do you need the end that is right hand thread or left hand thread? I believe the outters have the LH thread Edited July 3, 2004 by Fox73-Zz Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.