BANSHEEK Posted May 9, 2004 Report Posted May 9, 2004 bout to put 3 new springs in the clutch people that done it said it would help the stiffness ,now it slipps to hell in 5th and 6th, whats the torque on those springs never done it before, any tips or no nos. sheek Quote
FoxBansheeRacing Posted May 9, 2004 Report Posted May 9, 2004 You dont really need to torque them, but if you do its 7.4 foot pounds I think. I just use a quarter inch socket and tighten them all down, not as tight as you can get them, but snug. Quote
BANSHEEK Posted May 9, 2004 Author Report Posted May 9, 2004 alright that little water hose comming out the backdo u have to take it off, cause of course the nut has spun around where i cant get to it ?? SHEEK Quote
MotulMonsta Posted May 10, 2004 Report Posted May 10, 2004 No, you don't need to disconnect the hose..but you should drain the coolant Quote
jrm312 Posted May 10, 2004 Report Posted May 10, 2004 the torque on the springs is 86 inch pds so its not to tight. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.