SouthernBanshee Posted April 30, 2004 Report Posted April 30, 2004 hi guys need help with this. i want +4 advance but i dont want to waste 80 or even 35 bucks on aftermarket plates. Are there any pics or instructions about this item? I did a search but didnt find any post about it. will this mod make an improve on my shee??? my mods are pipes, air filter and reeds. thanx Quote
sredish Posted April 30, 2004 Report Posted April 30, 2004 You can use a die grinder or dremel and elongate the hole in the stock plate so that you can slide it to advance the timing some. It's very easy, I think like a quarter inch is about 3 degrees. Someone else will post a pic or link and give you a more accurate measurement I'm sure. Quote
SouthernBanshee Posted April 30, 2004 Author Report Posted April 30, 2004 correct me if im wrong. i need to slide it on counterclockwise... thanx Quote
nater006 Posted May 3, 2004 Report Posted May 3, 2004 (edited) Pretty sure it is clockwise. The + marks are above the 0 and the - marks are below, and they're on the righthand side. So if you rotate it clockwise, you get into the +1, +2 and so on, or rotate it counterclockwise for reversed. If ya squint or blow it up some... Ricky's pic shows it. (bottom) http://www.rickystator.com/pages/YamahaBanshee200stator.html Edited May 3, 2004 by nater006 Quote
sredish Posted May 3, 2004 Report Posted May 3, 2004 If ya squint or blow it up some...http://www.rickystator.com/pages/YamahaBanshee200stator.html The picture, not the motor. Yeah, it's clockwise, and I believe 1mm is about 1 degree. Quote
SouthernBanshee Posted May 3, 2004 Author Report Posted May 3, 2004 yes, its clockwise!!! i allmost make a huge mistake I needed some pictures Thanx a lot Quote
Crazyfletch Posted May 6, 2004 Report Posted May 6, 2004 I just recently used this same pic. that BDbanshee posted to modify my stator plate. I matched mine as close as I could to the picture, and checked afterwards with a timing light. I measured about 4 to 5 degrees advance. It seemed like 1mm. = 1degree. Quote
SouthernBanshee Posted May 6, 2004 Author Report Posted May 6, 2004 now i have a clear idea... thanx for the pics 1 mm = 1 degree thank you all Quote
doltz Posted May 6, 2004 Report Posted May 6, 2004 Dude buy the Ricky Stator it is only $30 & the degress are all scribed on it already. Quote
ledofthezep Posted May 6, 2004 Report Posted May 6, 2004 Well man, if you f*ck it up, let me know. I have 2 stock stator plates for anyone who wants them...5 bucks & you pay shipping. If you need one, PM me. Quote
SouthernBanshee Posted May 6, 2004 Author Report Posted May 6, 2004 im in Argentina and the only aftermarket plate i found here is an used pro design for 100 bucks and i dont wanna pay that much if i can modify my stock one i asked to the fedex guys for shipping and its u$s 75 + u$s 35 for ricky stator plate + some tax thanx Quote
nater006 Posted May 6, 2004 Report Posted May 6, 2004 Good luck! If the stockers are anything like Ricky's, they're soft metal and you shouldn't have any trouble hogging it out with a Dremel or other rotary tool. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.