yamaholic125 Posted April 18, 2004 Report Posted April 18, 2004 ok i found my air screw and idle screw now wat would be a good setting, how man turns in or out should they all be. Quote
yamaholic125 Posted April 18, 2004 Author Report Posted April 18, 2004 COME ON GUYS I NEED THIS Quote
00BANSHEE Posted April 18, 2004 Report Posted April 18, 2004 what carbs you running? Still have the TORs? Start with the air screws out 2 turns from seated and see what kind of response you have. Quote
yamaholic125 Posted April 18, 2004 Author Report Posted April 18, 2004 ok i did that but now it won't stay running and it revs up some times (with out me touching the throttle Quote
Banchetta Posted April 19, 2004 Report Posted April 19, 2004 Sounds like a kinked cable or the slides could be in backwards..... Quote
SCOTT PRESSLEY Posted April 19, 2004 Report Posted April 19, 2004 Or an air leak,what intake you running.If it is one of the ones with the boost bottle that has rubber gromlets then one of them might be leaking some air. Quote
yamaholic125 Posted April 19, 2004 Author Report Posted April 19, 2004 ok its good now, i just adjusted the throttle cable a bit. thanx guys. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.