BrokeStonedBiker Posted April 8, 2004 Report Posted April 8, 2004 i am going to buy me a tourque wrench. how many ft. bls do i need to tighten everything on the shee? Quote
nater006 Posted April 8, 2004 Report Posted April 8, 2004 You'll definitely want a manual for that.. everything is different.. Quote
ranshee Posted April 8, 2004 Report Posted April 8, 2004 Go to meats site, he has a torque guide for al bolts that need torque. Quote
2001SSTBanshee Posted April 8, 2004 Report Posted April 8, 2004 I have a Craftsman inch pound for the smaller stuff, and have access to a digital snap on for the bigger (bling) Quote
wansomordis Posted April 8, 2004 Report Posted April 8, 2004 most start out at 20-150 1/2 drive..Anything that goes to 100 would be just fine Quote
boonman Posted April 8, 2004 Report Posted April 8, 2004 You will need two torque wrenches to do the whole motor. Lower and upper. You need one that is 20-250 INCH/Pounds and one that is 20-250 FOOT/Pounds. The in/lbs will likely be 3/8" drive, and the ft/lbs will likely be 1/2" drive. I have Craftsman Microtorque wrenches. They work flawlessly. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.