bansheeman_95 Posted March 31, 2004 Report Posted March 31, 2004 can anyone give me an idea of where to start with the jetting on the keihins 28's? the jetting in my stock carb was 280 main needle on 2nd clip down and stock pilot. let me know if u need more info. thanks for any help Quote
banshee76179 Posted March 31, 2004 Report Posted March 31, 2004 http://www.thebansheezone.com/Bansheezone/AirIntake.htm Quote
bansheeman_95 Posted March 31, 2004 Author Report Posted March 31, 2004 i didnt see anything about the keihin 28mm's on that site Quote
banshee76179 Posted March 31, 2004 Report Posted March 31, 2004 it's pretty much the same give or get a little!! Banchetta or sredish will correct me they're the pro's... Quote
fixitrod Posted March 31, 2004 Report Posted March 31, 2004 Start at 310 main, middle needle position and stock pilot two turns out. Go from there. I'm assuming a stock motor with pipes and air filter. Quote
Banchetta Posted April 1, 2004 Report Posted April 1, 2004 Rod, he's looking for Keihin 28 suggestions.... Try a 160 mains, 40 pilots, and go from there....Let me know what symptoms you have after.... Quote
skinshee Posted April 1, 2004 Report Posted April 1, 2004 I have fmf fatties, k&n, and 28 mm carbs. I got a 260 main and a 30 pilot and it runs well. no bogging or cuttin out. Quote
fixitrod Posted April 1, 2004 Report Posted April 1, 2004 Rod, he's looking for Keihin 28 suggestions.... Try a 160 mains, 40 pilots, and go from there....Let me know what symptoms you have after.... OH!!!! Quote
Rescuejeff Posted April 2, 2004 Report Posted April 2, 2004 I have the same set up with 35 pilots, 320 mains and no air screw changes, and needle clip in the middle. Try playing that area and maybe it will fix your issues. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.