Rodeoranger Posted February 5, 2004 Report Share Posted February 5, 2004 Help me. I dont' know what to do next Quote Link to comment Share on other sites More sharing options...
Wassup350 Posted February 5, 2004 Report Share Posted February 5, 2004 If it's still fouling in one side check to make sure your compressions are the same. You may need a rebuild if they have a difference in em. Also make sure your wires are good. You could also try jetting it down a little bit. Quote Link to comment Share on other sites More sharing options...
Rodeoranger Posted February 5, 2004 Author Report Share Posted February 5, 2004 I did a compression and they both came out at 140 lbs on each side. I just installed the Trinty 2 into 1 carb kit. I have same problem as before. I left everything as it came when I installed. Quote Link to comment Share on other sites More sharing options...
ator Posted February 5, 2004 Report Share Posted February 5, 2004 Check your reeds, also, it still may be rich, but check the reeds on the left side, they may be worn just enough to foul out that sides plug. Quote Link to comment Share on other sites More sharing options...
evil Posted February 5, 2004 Report Share Posted February 5, 2004 Check your reeds, also, it still may be rich, but check the reeds on the left side, they may be worn just enough to foul out that sides plug. bingo !!! i had the same problem, right side kept fouling out, turns out the reed was wasted. Quote Link to comment Share on other sites More sharing options...
sredish Posted February 5, 2004 Report Share Posted February 5, 2004 Check your reeds, also, it still may be rich, but check the reeds on the left side, they may be worn just enough to foul out that sides plug. bingo !!! i had the same problem, right side kept fouling out, turns out the reed was wasted. damn, why didn't I think of that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.