87blueshee Posted January 28, 2004 Report Share Posted January 28, 2004 I got front plastic from Maier the Radiator Cover, Gas Tank Cover, and Front Fender. They dont fit worth crap. What did you guys do if you had this problem any pics would be nice too. Thanks Quote Link to comment Share on other sites More sharing options...
ledofthezep Posted January 28, 2004 Report Share Posted January 28, 2004 I don't have any direct experience with Maier fenders, but I know from what I've heard pretty much all of their shit doesn't fit right. Just about everyone I know that has them or from what I've heard they've had to trim/modify the plastics a bit to get them to fit right. Quote Link to comment Share on other sites More sharing options...
oldasdirtrider Posted January 29, 2004 Report Share Posted January 29, 2004 I just bought factory blem rear and front race cut fenders. The rear fit just right. I also bought a new radiator cover and tank covers. The whole front end does not fit right, at first I wanted to blame it on the fact the front was a blem and appears slightly warped, but the radiator cover seems like it is too tall and too wide. I had to trim the front section to get the radiator cover to fit close enough, it still is a little jacked up but it doesn't look too bad. Quote Link to comment Share on other sites More sharing options...
Labarraca_Baca Posted January 30, 2004 Report Share Posted January 30, 2004 I bought the maier plastics too the backs fit great but the front is all messed up it took alot of muscle to install the tank covers, radiator cover, and the racing fenders my tank covers are to tall and it took some muscle to get the screws. it still looks sexy with the new tribal flame kit i put on Quote Link to comment Share on other sites More sharing options...
BansheeBrian Posted January 31, 2004 Report Share Posted January 31, 2004 I have race cut fronts from them and it was a hassle to get them on.I had to drill those holes just right or the plastic would stress when bolted in.Once on correctly they cleaned up the bike nicely. Quote Link to comment Share on other sites More sharing options...
trippleport350 Posted February 2, 2004 Report Share Posted February 2, 2004 Same story for me. The back fenders fit perfect while the fronts were not even close. With a little drilling and muscle I did get the front on and looking good.. Quote Link to comment Share on other sites More sharing options...
DirtGrrl Posted February 18, 2004 Report Share Posted February 18, 2004 i bought some maier and some UFO..the UFO fit fine but the damn Maier plastics dont fit..the buckle and overlap all over the front of the bike. They look sloppy. I guess I never thought to trim then though. But for the $$ paid,,ugh,,, Quote Link to comment Share on other sites More sharing options...
Labarraca_Baca Posted February 18, 2004 Report Share Posted February 18, 2004 for the buckling and stuff like that you really have to force the plastic to fit, but i didnt mix them up heres the finished result Quote Link to comment Share on other sites More sharing options...
rebelbanshee2 Posted February 18, 2004 Report Share Posted February 18, 2004 well my maiers fit perfect front and back, even better than stock. maybe my bike was bent just right? Quote Link to comment Share on other sites More sharing options...
Atvrider_96 Posted February 19, 2004 Report Share Posted February 19, 2004 I have maier fronts. They are shit. next time i am going with fulbore. Quote Link to comment Share on other sites More sharing options...
99screaminshee Posted February 19, 2004 Report Share Posted February 19, 2004 i have maier fenders and they fit great as for fullbore thats some of the stupidest lookin fenders i have ever seen ever worse than the ones on the new honda 450r i really like ufo they fit the best and look like stock ive never had any problems with my maier fenders even though i change from stock to maier alot different weather different fenders Quote Link to comment Share on other sites More sharing options...
lian Posted February 20, 2004 Report Share Posted February 20, 2004 i got front mier racing plastic i didnt like that i had to drill the holes but who knows maybe if they did it it would be worse when trying to mount but the only thing that didnt seem right was the sides under the tank cover it didnt seem right Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.