vmaxup Posted January 7, 2004 Report Posted January 7, 2004 Ok big problem I had to take apart the cases to get the rod out of the cases, The ball adjuster and rod were all welded together. I thought it was low on oil or what ever. I replaced everything and it ran great at Glamis fo 2 days. I then lost the clutch again. Everything was welded again. So I have all my new parts istalled but scared it will happen again. Anyone got some info for me Eric Quote
evil Posted January 7, 2004 Report Posted January 7, 2004 have you been pulling in the clutch coasting down hill with it in gear ? Quote
ledofthezep Posted January 7, 2004 Report Posted January 7, 2004 whats a TRD eliminator kit. Dunno... Quote
geaux 4 it Posted January 8, 2004 Report Posted January 8, 2004 Check the clutch cable to see if it is binding or just slow when returning .If the cable is not returning,it will not have enough slack to release preasure off the ball and rod,but enough to keep the clutch from slipping. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.