03SEBanshee Posted February 3, 2024 Report Posted February 3, 2024 Just wondering if the Banshee uses 0.0020in base gasket and I install 0.0016in base gasket is that the same as if I took 0.004in off the head? Sent from my BBF100-2 using Tapatalk Quote
375hp banshees Posted February 3, 2024 Report Posted February 3, 2024 No head wont change port timing, base will. Either way, you need to follow up with squish measurement. And... 0's are important Quote
03SEBanshee Posted February 3, 2024 Author Report Posted February 3, 2024 No head wont change port timing, base will. Either way, you need to follow up with squish measurementOk and if I'm only changing it by 4 thou will that make a huge difference and what type of squish am I looking for or does that depend on the engine setup? Engine is all stock except a clean up of all the over casting and flash in the way of air flow they are 64mm stock cylinders, full FMF gnarly with PowerCore2, K&N filter with semi open lid, 260 mains. What type of squish range is good for me, I will be running 95octane pump gas or 102-103 octane when mixed with VP if I need to. HUGE THANKS FOR THE HELP BROTHER.Sent from my BBF100-2 using Tapatalk Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.